Contact Platform Support
Help CenterMetal Mine Exploitation Drilling Rig / Multi-angle Construction in the Tunnel
Related Products
-
Hydraulic XY-150 Water Well Drilling Rig / 150m Borehole Testing EquipmentUS$ 6500 - 6700MOQ: 1 Set -
XY-180 Hydraulic Water Well Drilling Rig / 150 Meter Rig PriceUS$ 6500 - 6700MOQ: 1 Set
-
200m Well Drilling Rig / Hydraulic Drilling Machine on SaleUS$ 6700 - 6900MOQ: 1 Set
-
XY-8 Excellent Direct Sale Portable Type Folded Small Water Well Drilling RigUS$ 3000 - 3500MOQ: 1 Set
-
XY-44A Hydraulic Core Drilling Rig / 600-1400m Drilling Depth DrillUS$ 2500 - 2800MOQ: 1 Set
1.The brief introduction of KY-300 full hydraulic drilling rig
KY-300 tunnel drilling rig is suitable for drilling at any angle in the tunnel or surface. It is small in size, light weight, convenient installation and operation, large adjustable speed and good linkage performance.
2.The parameter of KY-300 full hydraulic drilling rig
Drilling diameter (mm) |
ø47 |
Drilling depth (m) |
300 (aluminum alloy drill rod) ø43 Steel drill rod 240 |
Rig power |
37kw (motor) |
Drilling weight |
Main engine 295kg/backbone66kg/operating floor 86kg/power car 480kg |
Full hydraulic wireline core prospection drilling rig KY-6075 for metal mine
Key words:KY-6075, mine drilling rig, full hydraulic,prospecting drill, prospecting equipment, mineral prospecting equipment, geophysical prospecting instruments,prospecting drilling rig,wire line drilling rig,wire line drilling machine, wire line core drilling machine,wire line equipment.
1.Model description of KY-6075 drilling rig
K: tunnel/ Y: hydraulically operated mechanical transmission/ 60mm-75mm: drilling rock diameter
2.Working conditions of KY-6075 wireline core prospection drilling rig
The fully hydraulic wireline core drilling rig is suitable for the chamber with complete roof, no broken, no quicksand and no support.
a.Horizontal drilling: the chamber requires the height is 2000mm* and the width is 2000mm.
b.Horizontal lateral drilling: the chamber requires the height 2000mm* and the width 4000mm.
c.Vertical upper and lower angle drilling: the chamber requires the height is 4000mm* and the width is 2000mm.
3.Characteristics of wireline core prospection drilling rig KY-6075 for metal mine
a.It is small volume, light weight and easy installation. 360 degree omnidirectional drilling wire line core and core without pulling out drill pipe.
b.Three parts: the main engine, the pump station, the operating floor.
c.It can be put into production in the original transportation and prospecting tunnel, and play a protective role in the overall structure of the mine. It can also be used for 0-90 degree surface drilling.
d.The drill rig is arranged flexibly, mechanically screwing and unscrewing drill pipe, so as to reduce workers' labor intensity and improve work efficiency.
e.With the box feeding frame, gripper tightening, power head rotary drilling, oil cylinder delivery tool, save heavy drilling tower.
f.It has the function of linkage, centralized control through operating floor, simple and safe, and no speed regulation.
g.Hollow shaft design, drill pipe length is not restricted by drilling rig feed stroke.
h.The disintegration is good and the relocation is convenient. Φ49-Φ60-Φ75 The drill can be used on the same machine. It takes only 15 minutes to replace it.
i.Oil pump, water pump, power supply centralized operating table.
j.The drawing column is suitable for the high and low lanes.
k.The imported oil meter line is subjected to high pressure and its softness will reduce the pressure pulse of high pressure oil, so that it can make the pointer of hydraulic oil table more stable, and can detect the formation and rock changes in time.
l.The special custom oil temperature cooler, high pressure oil cooling soon and low temperature application can protect the service life of motor, oil pump and rubber seal.
4.The advantages of KY-6075 wireline core prospection drilling rig
a.To reduce the auxiliary time of the drill pipe and to increase the time of drilling, the deeper the drill hole is, the more significant the economic effect is.
b.Reducing the physical labor of the workers.
c.Core jam can immediately gain, improve the rate of rock core recovery.
d.Reduce wear and tear of drill pipe thread, prolong drill pipe life and reduce pipe consumption.
e.It reduces drill hole wear, twist and collision with the hole wall and prolongs the life of the drill bit.
f.Reduce the balance between the washing fluid and the pressure of the hole wall, so as to reduce the accident in the hole.
g.Reduce the mechanical wear and increase the service life of driller.
uce the degree of borehole bending and improve the quality of drilling.
i.It is good for drilling complex formation and avoiding collapse of hole wall.
j.Steel cable can be used to put the clinometer in drill pipe to carry on the survey.
5.The parameter of KY-6075 wireline core prospection drilling rig
Drilling angle |
tunnel/surface/ 0-360 degrees |
Drilling depth |
steel drill rod 46mm*600m/Steel drill rod 56mm*550m/Steel drill rod 71mm*500m |
Spindle rotation number |
800-1060 r/min |
Spindle output torque |
184-550n.m(torque platform test) |
Rated feed force |
60kn (torsion platform test) |
Feed stroke |
900mm |
Motor power |
oil pump motor 55kw, pump motor 11kw |
Motor model |
L6V80 (Guizhou force source) |
Oil pump model |
80YCY14-1B plunger pump/ 10TCY14-1 |
Host weight |
380kg |
Host size |
1600mm*300mm*400mm |
Operating floor weight |
60kg |
Operating floor size |
610mm*530mm*1150mm |
Power car weight |
550kg |
Power car size |
1340mm* 560mm*1010mm |
6.The parameter of KY-6075 steel cable coring drilling rig
a.Drill pipe 46mm, core pipe 48mm, drill bit 49mm, reamer 49.5mm, recover core 29mm.
b.Drill pipe 56mm, core pipe 58mm, drill bit 60mm, reamer 60.5mm, recover core 41.5mm.
c.Drill pipe 71mm, core pipe 73mm, drill bit 75mm, reamer 75.5mm, recover core 49.5mm.
Master Machinery Group Co.,Ltd. China
Sales Manager： Jane Zhao
Sales hotline：86 537 18865479507
Tel: 18865479507
wahtsapp: 8618865479507
Website:
Waiting for your message ~. ）
Send Inquiry to This Supplier
You May Also Like
-
XY-44A Well Drilling RigUS$ 2500 - 2800MOQ: 1 Set
-
XY-8hydraulic Drilling RigUS$ 3000 - 3500MOQ: 1 Set
-
FY130wheel Type Pneumatic Drilling RigUS$ 3500 - 3800MOQ: 1 Set
-
KY-150 Metal Mine Full Hydraulic Prospecting Drilling RigUS$ 3800 - 4000MOQ: 1 Set
-
KY-200 Metal Mine Full Hydraulic Prospecting Drilling RigUS$ 3800 - 4000MOQ: 1 Set
-
KY-250 Metal Mine Full Hydraulic Prospecting Drilling RigUS$ 3800 - 4000MOQ: 1 Set
-
KY-300 Metal Mine Full Hydraulic Prospecting Drilling RigUS$ 3800 - 4000MOQ: 1 Set
-
KHYD75 Rock Electric Drill 3KW Rock Electric DrillUS$ 3800 - 4000MOQ: 1 Set
-
ZDY-1200S Double Pump Full Hydraulic Tunnel Drill for Coal MineUS$ 3800 - 4000MOQ: 1 Set
-
ZDY-1600S Double Pump Full Hydraulic Tunnel Drilling Rig for Coal MineUS$ 3800 - 4000MOQ: 1 Set
