HTY-302G microbial limit test instrument

 Introduction

HTY-302G microbiological test instrument is based on the relevant provisions of the design and manufacture of the Pharmacopoeia of microbial limit test of special equipment, the use of high performance diaphragm pump, direct discharge, without the suction flask, and through the different pump head with special filter cup or limit for training, the formation of membrane filtration device end. When detecting the aliquot by membrane filtration, the test solution within the microbial retention in the membrane, and then cultured to form visible colonies were counted, to detect strains containing the product. The product is suitable for microbial limit test of purified water and water for injection.

Features:

1. The built-in miniature high-performance diaphragm pump, without the suction filter bottle, greatly reduce the work station space occupied, use more convenient;

2. Push button switch with pilot light indication control, easy operation;

3. A host can be used with two kinds of pump head, more choice, more cost-effective;

4. Three pump head can operate at the same time, also can be independently controlled, high efficiency;

5. The pump head can quick disassembling, can separate 121 ℃ hot and humid sterilization;

6. Pump head available flame rapid sterilization, convenient and continuous experiments;

7. Stainless steel casing by the mirror polishing, the surface is bright and clean level off, facilitate clean disinfection;

Technical parameters

1 comsumables: S60 microbiological culture apparatus, F47 (phi 47mm microporous membrane filter cup)

2 incubator or filter cup volume: 100ml

3 power supply: AC 220V/50Hz

4 power: 50W

5 flow: more than 1200ml/min (pump)

6 noise: less than 60dB (A) (load)

7 weight: 8kg (with PF47 pump head) /10kg (with PS60 pump head)

8 dimensions (length * width * height):40.5 * 23 * 12cm