F96S Fluorescence Spectrophotometer Price

Introduction
F96s high-speed fluorescence spectrophotometric meter is wavelength automatic regulation type fluorescence spectrophotometer, excellent instruments design can meet a variety of needs of different analytical application. It uses cold light source and replacement of interference filter system and can be extended to red sensitive band photoelectric multiplication pipe detector design, can provide from 250 nm to 600 nm with excitation configuration; emission monochromator by 1200 line grating, large aperture non spherical mirror optical system, high speed scanning seconds can complete full spectrum scanning, the calculated and measured, professional software contains a variety of functional analysis. The application range of the instrument can be used to support the measurement of liquid, powder and thin film samples, which can be used to realize the measurement of the high concentration sample with fluorescence quenching, and can be equipped with automatic feeding system and so on.

Features

1.Can choose luminescence intensity of fluorescence intensity and 2 kinds of operating modes, fluorescence intensity can be carried out under the mode of fluorescence spectrum scanning and determination of fluorescence kinetics, and quantitative analysis.

2. The 365 - nm excitation wavelength distilled water Raman peak signal-to-noise ratio > 90 (P - P), with the high detection sensitivity for low concentration sample measurements.

3. Provide 10 file emission spectrum scanning speed choice, including low noise scanning and fine scan at a high speed.

4. Support stand-alone, online two modes.

5. With functions of normalized fluorescence value, can eliminate the differences between fluorescence photometer fluorescence value cannot be compared.

6. Qualitative/quantitative software feature-rich, emission wavelength scanning and time scanning mode can provide comparison of map zoom, map, map operation, peak detection, peak area calculation and 1-4 derivative spectrum function;

7. A variety of measurement accessories, including single-hole stalls, multi-purpose fluorescence samples, 200 (including L trace centrifuge tube attachment, capillary trace sample measurement accessories, fluorescence sample semi-automatic into accessories, etc.

8. The high reliability of cold light source, with low background, low power consumption, low temperature, long life, high strength advantages.

9. Small and exquisite model can save a lot of desktop space

Technical parameters

Light source: high strength cold light source

Bandwidth: inspire: 10/20 nm emission: 10 nm

Excitation wavelength range (Ex) : 250 ~ 600 nm can be extended to 250 ~ 850 nm

Standard: 4 kinds of excitation wavelength of 365 nm, 365 nm, 470 nm, 515 nm

Emission wavelength range: (200-650 nm), can be extended to 200-900 nm (C - T monochromator)

Wavelength accuracy: launch monochromator: plus or minus 1 nm

Wavelength repeatability: launch monochromator: 0.5 nm or less

Scanning speed: 10 file switch choice: high speed 30000 nm/min, 15 nm/min

Time to scan: can set arbitrary, up to 60000 seconds

Response time: 6 (0.1 4) seconds switch selection

Fluorescence value range: 0.00 to 600.00

Data transfer mode: USB2.0

Voltage: 110 v / 220 v, 50 hz or 60 hz

Energy consumption: 35 w

The host size: 442 x392x250mm

Net weight: 9.6 Kg