OR Shell and Tube Coolers

FOB Price

Negotiable / Set

1 Set(Min. Order)

Port guangzhou
Payment TermsPayPal
Delivery Detail7 days

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Brand Name	OEM	Place of Origin	China
Model Number	OR	After-sales Service Provided	No overseas service provided
Warranty	1year	Condition	New
Maximum Working Pressure	1MPa

Product Description

Key Features

1. The effect of heat transfer and cooling is better. The cooler adopts multi-tube type, with large cooling area and good cooling.

2. Full cooling area. The number of copper pipes used in this cooler is more than three times that of fin-tube type and Roller-tooth type. The cooling area is calculated by the surface area of copper pipes, so the cooling area is adequate.

3. Cooling pipe material is the best heat dissipation. Pure copper tube with heat conductivity above 0.95.

Type and Performance Parameter Table

Model	A	B	C	D	E	F	G	J	K	L	M	N	Radiator tube	flow
OR-60	450	305	45	89	121	3/4”	3/4”	23	11	115.5	95	7*10	22	60
OR-100	555	403	60	114	134	3/4”	3/4”	23	12.5	145.5	106.5	10*20	26	100
OR-150	575	385	70	140	175	1 1/4”	1”	30	12.5	175	130	13*16	42	150
OR-250	780	585											58	250
OR-350	1180	990											58	350
OR-600	1175	950	110	165	207	2”	1 1/4”	34	12.5	205	161	13*16	58	600
OR-800	1700	1490											58	800
OR-1000	2140	1890											58	1000

Note

Both sides of the oil outlet of the cooling pipe can freely decide the entrance and exit, and the flow direction of the oil itself is unrestricted. The water inlet must enter from the bottom and the water outlet from the top.

Freshwater only. The use of sea water should be specially tailored.

Food and chemicals must not be used.

When the temperature difference between water inlet and oil inlet is above 80 C, it can not be installed.

Maximum pressure: 10 kg on oil side and 7 kg on water side.

The cooling efficiency can be maintained only when the scale is removed once every 4 months or half a year on the water side (inside the heat pipe). Keep the amount of oil equal to that of water when using high viscosity oil.