Contact Platform Support
Help CenterDurable DTIA1000 Electric Putter Produced in Jiangsu Province
Related Products
-
Manufacturer of Portable LT06 Electric PutterNegotiableMOQ: 1 Set -
Specialized Customized TDT Decanter Electric Putter, Double Thrust Electric PutterNegotiableMOQ: 1 Set
-
Practical DT2000-300 Electric PutterNegotiableMOQ: 1 Set
-
DTZ1000-300 Electric Putter With Outside Straight StrokeNegotiableMOQ: 1 Set
-
Type Selection Dimension Table of Electric Putter Used in Hopper MatchingNegotiableMOQ: 1 Set
Points for attention in selecting and purchasing electric putter:
Firstly, each manufacturer makes customized processing according to the specific parameters of customers, which requires a certain supply cycle. Then, when choosing and purchasing electric putter, customers should first reserve a certain time limit for the project. The specific delivery time can communicate well with the manufacturer, so as not to delay the use of the project due to the time limit.
Secondly, the electric putter belongs to mechanical auxiliary equipment, which is used with other equipment. This involves the installation size. The product size of each manufacturer has the approximate standard, but it is not exactly the same. In order to avoid the size problem affecting the installation, it is necessary to design the size of the electric putter first in the equipment to be used, instead of processing the equipment first, and then selecting the electric push rod, which is very troublesome. The result is that the size is not suitable for use. Either to change equipment or to change the electric putter scheme, even if finally installed, whether for the whole equipment or the electric putter, the performance will be somewhat affected, can not give full play to its functionality.
Type |
Thrust (kgf) |
Speed (mm/s) I II |
Power (kw) I II |
Stroke (mm) |
Length(mm) Lcmin Lcmax |
Connector(mm)
L2 LX L1 C D |
High width(mm)
ΦE ΦF G N H |
In/outsleeve(mm)
I φ1 φ2 φX |
||||
DT25 |
25 |
42 / |
0.06 / |
100-300 |
169+S 169+2S |
45 |
Power |
17 |
8 25 |
6 20 ! 58 85 |
17.5 60 36 |
P O W E R
|
DT100 |
100 |
42 84 |
0.12 0.18 |
100-600 |
210+S 210+2S |
100 |
20 |
16 37 |
10 25 36 70 112 |
25 68 55 |
||
DT300 |
300 |
50 84 |
0.37 0.55 |
100-800 |
217+S 217+2S |
113 |
30 |
20 40 |
40 25 48 80 130 |
25 86 55 |
||
DT500 |
500 |
50 100 |
0.75 1.1 |
100-800 |
267+S 267+2S |
113 |
30 |
20 40 |
14 35 48 85 140 |
25 86 60 |
||
DT700 |
700 |
50 100 |
0.75 1.1 |
200-1000 |
267+S 267+2S |
140 |
35 |
20 52 |
14 35 63 85 140 |
25 100 76 |
||
DT1000 |
1000 |
50 100 |
1.1 1.5 |
200-1000 |
267+S 267+2S |
140 |
35 |
20 52 |
14 35 63 85 140 |
25 100 76 |
||
DT1600 |
1600 |
50 100 |
2.2 3 |
200-1000 |
300+S 300+2S |
145 |
50 |
35 70 |
25 40 96 108 240 |
25 145 95 |
||
DT2000 |
2000 |
50 100 |
2.2 3 |
200-1000 |
300+S 300+2S |
00 |
00 |
00 00 |
00 00 00 00 00 |
00 00 00 |
||
In addition, the selection of electric putter must consider the frequency of use. Generally, the models of each manufacturer are marked. Commonly, the working system is used. This specific communication with the manufacturer is good. There are many products on the market at present although marked, but the actual working frequency may not reach. Therefore, the customers of products with very low prices should pay attention to, and the use performance will be discounted.
Send Inquiry to This Supplier
You May Also Like
-
Special DT Electric Putter for Steel MillNegotiableMOQ: 1 Set
-
Latest Quotation of DT Series Electric Putter Hopper MatchingNegotiableMOQ: 1 Set
-
DTZ Electric Putter of Preferred Cost Performance RatioNegotiableMOQ: 1 Set
-
DTZB1000-500 Explosion-pro of Electric Putter for Coal MineNegotiableMOQ: 1 Set
-
YZ Cycloidal Needle Wheel Oil-cooled Motorized Pulley With Good PerformanceNegotiableMOQ: 1 Unit
-
TDY75 Oil-cooled Motorized Pulley With the Highest SalesNegotiableMOQ: 1 Unit
-
Customized YD Miniature Oil-immersed Motorized PulleyNegotiableMOQ: 1 Unit
-
Professionally Customized 37 KW Motorized PulleyNegotiableMOQ: 1 Unit
-
Price of Motorized Pulley With Good Performance Planetary Hard Tooth SurfaceNegotiableMOQ: 1 Unit
-
Price of Motor Built-in Motorized Pulley and Motor External Motorized PulleyNegotiableMOQ: 1 Unit
