Contact Platform Support
Help CenterHydraulic Stressing Jack With Multi-Strands
Related Products
-
50-500t Multi PC Strands Stressing Jack Post Tension Jack in ConcreteUS$ 650 - 2000MOQ: 1 Piece -
Multi-Strands Stressing Jack Equipment Including Oil PumpUS$ 500 - 3500MOQ: 1 Piece
-
Ydc4000 Hydraulic Stressing Jacks for Post TensionUS$ 650 - 2000MOQ: 1 Piece
-
Mono Strand Pulling JackUS$ 800 - 2000MOQ: 1 Piece
-
Post Tension Mono Strand Hydraulic JackUS$ 800 - 2000MOQ: 1 Piece
Wholesale 65-600 tons Hydraulic Stressing Jack
Descriptions of Hydraulic Stressing Jack:
1. It is suitable for the tension of group anchors with 1860-2000 sizes, î¦15.24, î¦12.7 strands.
2. In some certain circumstance it can be used in the working of pushing, jacking and transforming and so on.
3. Easy to operate and used widely.
Notice: according to users' requirement, YDC prestressing jack can be configured
Features of stressing jacks:
YDC feed-through jacks are the new designed products in our company, are the upgrades of the primary jacks.
1. Using the new seals, to synchronous strengthen the seal-ability under great pressure.
2. Using special alloy steel with heat treatment process, reducing the cylinder's expansion ratio in the tensioning process. So that the life of seals and sealing performance can be improved about 20%.
3. In the tensioning the operating process, multi Strand Jacks is easily damaged under overpressure because of the jack-based pullback clinder, so we added the overpressure valve on the jacks to pressure production. Meanwhile we improved the original of commonly used structure by wire disc and flanged disc, to make the bearing capacity for oil pressure strengthen. So that enormously reduce the possibility of mechanical damage due to improper operation.
In the word, the YDC series feed-through jacks' performance is improved, and widely used in pre-stressing and poststressing construction.
Parameters of post tensioning hydraulic jack:
| Model specifications | Nominal tensile force (KN) | Nominal oil pressure (Mpa) | Through hole diameter (mm) | Install limit plate aperture (mm) | Mounting tool (mm) | Outside diameter size (mm) Diameter * Height |
| YDC650 | 650 | 48 | 72 | 99 | 95 | 200*385 |
| YDC1000 | 1000 | 50 | 78 | 111 | 111 | 230*385 |
| YDC1500 | 1500 | 52 | 94 | 150 | 150 | 270*390 |
| YDC2000 | 2000 | 53 | 118 | 177 | 177 | 320*400 |
| YDC2500 | 2500 | 52 | 128 | 210 | 185 | 345*400 |
| YDC3000 | 3000 | 52 | 135 | 190 | 185 | 370*400 |
| YDC3500 | 3500 | 51 | 160 | 232 | 232 | 420*400 |
| YDC4000 | 4000 | 52 | 165 | 252 | 252 | 450*410 |
| YDC5000 | 5000 | 52 | 196 | 260 | 265 | 500*410 |
| YDC6500 | 6500 | 53 | 220 | 295 | 235 | 580*420 |
| YDC10000 | 10000 | 50 | 270 | 440 | 415 | 740*570 |
Send Inquiry to This Supplier
You May Also Like
-
Mono Strand Pulling JackUS$ 800 - 2000MOQ: 1 Piece
-
Wholesale Anchor Extruder for Post TensioningUS$ 1000 - 1500MOQ: 1 Set
-
Wholesale Colloidal Grout MixerUS$ 15000 - 16000MOQ: 1 Set
-
Wholesale Hydraulic Electric Oil PumpUS$ 930 - 1200MOQ: 1 Set
-
Wholesale Hydraulic Strand Jack SystemUS$ 500 - 5000MOQ: 1 Set
-
Wholesale Hydraulic Stressing JackUS$ 700 - 3000MOQ: 1 Set
-
Wholesale Intelligent Prestressed TensionUS$ 21000 - 28000MOQ: 1 Set
-
Wholesale Mono Strand Pulling JackUS$ 630 - 650MOQ: 1 Set
-
Wholesale Post Tension AnchorUS$ 1 - 100MOQ: 1 Set
-
Wholesale Strand Pusher MachineUS$ 800 - 2000MOQ: 1 Set
