Contact Platform Support
Help CenterArray Induction Tool
Related Products
SITAN STGY89-200D Array induction logging tool is based on the principle of electromagnetic induction to measure the resistivity of the formation. SITAN STGY89-200D array induction tool can obtain 3 kinds of vertical resolution curves, 6 different investigation depth resistivity curves and 6 investigation different depth real resistivity curves, which can evaluate spatial distribution of resistivity, mud invasion, reservoir fluid type, division of oil, gas and water interface, can also calculate water saturation and improve the accuracy of logging interpretation. The logging data of array induction tool are of great significance for the search of thin reservoirs and the discovery of low resistivity reservoirs.
Features:
1. Fine debug, the detection range can reach real 2000Ω·m .
2. No need to use iron, you only need to replace the mechanical connector and interface board to connectthe EILOG system.
Model |
STGY89-200D |
Max pressure |
140MPa(20,305psi) |
Max temperature |
175℃(347°F) 2h |
O.D |
92mm (3.622in) |
Min hole |
114.3mm (4.5in) |
Max hole |
508mm (20in) |
Logging speed |
30ft/min |
BUS mode |
WTS Bus Command/Status: M2 Data: M5. |
Measurement range |
0.1-2000 Ω·m |
Probe depth |
10, 20, 30, 60, 90, 120in |
Vertical Resolution |
1, 2, 4ft |
Measurement Accuracy |
±1ms/m |
Come from: For more information, please refer to:/products/ground-monitoring/Array-Induction-Tool.html
Send Inquiry to This Supplier
You May Also Like
-
Compensated Neutron LogNegotiableMOQ: 1 Set -
Litho Density Logging ToolNegotiableMOQ: 1 Set
-
Sonic Logging ToolsNegotiableMOQ: 1 Set
-
Dual Lateral Logging ToolNegotiableMOQ: 1 Set
-
Micro Spherically Focused LogNegotiableMOQ: 1 Set
-
Four Arm Caliper Logging ToolNegotiableMOQ: 1 Set
-
Perforating ToolsNegotiableMOQ: 1 Set
-
Physical SamplerNegotiableMOQ: 1 Set
-
Tools For Well Startup And Well Shut InNegotiableMOQ: 1 Set
-
Hydraulic Blowout Preventer SystemNegotiableMOQ: 1 Set
