Sonic Logging Tools
SITAN sonic logging tool has two transmitters and four receivers, which are used to measure the time difference of formation longitudinal wave so that to get formation lithology and porosity. The sonic logging tool can provide a P-wave time difference curve, then compensate the irregular boreholes influence with depth compensation method.
Model |
STSB89-200D MA |
Max pressure |
140MPa(20,305psi) |
Max temperature |
175℃(347°F) 2h |
O.D |
85.9mm (3.38 in) |
Min hole |
121mm (4.75in) |
Max hole |
450mm (17.5in) |
Logging speed |
60 ft/min (18 m/min) max |
BUS mode |
WTS-IB M2 M5/M7 |
Come from: For more information, please refer to:/products/ground-monitoring/Sonic-Logging-Tools.html
Send Inquiry to This Supplier
You May Also Like
-
Tension/Temperature/Mud Resistivity Logging ToolNegotiableMOQ: 1 Set
-
Open Hole Surface Data Acquisition SystemNegotiableMOQ: 1 Set
-
Telemetry/inclinometerNegotiableMOQ: 1 Set
-
Spectral Gamma Ray ToolNegotiableMOQ: 1 Set
-
Compensated Neutron LogNegotiableMOQ: 1 Set
-
Litho Density Logging ToolNegotiableMOQ: 1 Set
-
Perforating ToolsNegotiableMOQ: 1 Set
-
Physical SamplerNegotiableMOQ: 1 Set
-
Tools For Well Startup And Well Shut InNegotiableMOQ: 1 Set
-
Hydraulic Blowout Preventer SystemNegotiableMOQ: 1 Set