Contact Platform Support
Help CenterTobee® TG/TGH Gravel Dredge Pumps-www.slurrypumpsupply.com
Related Products
-
China Centrifugal Gravel Sand Pump for Mineral ProcessingUS$ 1000 - 3000MOQ: 1 Set -
China 16x14 Sand Booster Pump Delivering in Dredging and Sand MiningUS$ 1000 - 3000MOQ: 1 Set
-
Tobee® Gravel Sand Pump-www.slurrypumpsupply.comUS$ 800 - 2000MOQ: 1 Piece
-
Tobee® TG18x16TU Dredging Slurry Pump-www.slurrypumpsupply.comUS$ 800 - 2000MOQ: 1 Piece
-
Tobee® TGH16x14TU Sand Booster Pump-www.slurrypumpsupply.comUS$ 800 - 2000MOQ: 1 Piece
SPECIFICATIONS:
Size: 4"-18"
Capacity: 36-4320m3/h
Head: 5m-80m
Handing solids: 0-260mm
Pressure: Max.800kPa
Material:High chrome alloy,Hyper chrome alloy etc
Tobee® TG/TGH Gravel Dredge Pumps are interchangeable with the world’s standard G/GH gravel dredge pumps for large particle slurries, sands, dredge and gravel applications. TG/TGH gravel dredge pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.
Design Features:
• The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
• Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation.
• Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
• The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a one-piece design. (Except the 6/4 DG which has two components)
• Heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
• A unique “-10” (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all gravel pumps.
Tobee® TG/TGH » Warman® G/GH Gravel Dredge Pumps Structural Design:
Tobee® TG/TGH » G/GH Gravel Dredge Pumps Component Design:
Tobee® TG/TGH » G/GH Gravel Dredge Pumps On-site Applications:
sludge seed pump
diesel desilting dredger pump
marine sand pump
river sand dredging machine
electric dredge pump
alluvial dredge pump
diesel engine gravel pump
diesel engine drive mud pump
river sand pump
sand gravel pumps
gravel pump 8-inch
high pressure dredge pump
Email: Sales7@tobeepump.com
Web: /
Skype: liulynn66
Whatsapp: +8615831127175
Send Inquiry to This Supplier
You May Also Like
-
Tobee® TG14x12G Diesel Engine Sand Pump-www.slurrypumpsupply.comUS$ 800 - 2000MOQ: 1 Piece
-
Tobee® TG12x10G Dredging Sand Pump-www.slurrypumpsupply.comUS$ 800 - 2000MOQ: 1 Piece
-
Tobee® TG10x8S Dredging Gravel Pump-www.slurrypumpsupply.comUS$ 800 - 1200MOQ: 1 Piece
-
Tobee® 8x6 Sand Gravel Pump-www.slurrypumpsupply.comUS$ 800 - 1200MOQ: 1 Piece
-
Tobee® TG6x4D Tunnel Gravel Pumps-www.slurrypumpsupply.comUS$ 800 - 1200MOQ: 1 Piece
-
Tobee® 1.5x1C-HH High Head Slurry PumpUS$ 800 - 2000MOQ: 1 Piece
-
Tobee® 20/18TU-AHR Weir Rubber Slurry PumpUS$ 800 - 2000MOQ: 1 Piece
-
Tobee® 18/16TU-AH Mining Horizontal Slurry PumpUS$ 800 - 2000MOQ: 1 Piece
-
Tobee® 16/14TU-AH Rubber Slurry Pump AUUS$ 800 - 2000MOQ: 1 Piece
-
Tobee® 14/12ST-AHR Rubber Slurry PumpUS$ 800 - 2000MOQ: 1 Piece
