Safety capacitor charging and discharging test rig

Characteristics of [Safety capacitor charging and discharging test rig]

1. Touch screen settings and display parameters, parameters power-off memory;

2. Program control to realize automatic test process;

3. Automatic timing, counting;

4. There are oscilloscope monitoring ports;

5. Voltage 0 V off-regulation, over-voltage, over-current and other safety protection functions;

6. Test box with safety switch;

7. Can be customized according to customer needs non-standard.

Introduction to  [Safety capacitor charging and discharging test rig]

The 5600C/ 3p capacitor charging and discharging test-bed is a device which uses DC power supply to carry on the charge-discharge test to the test capacitor. This instrument is designed and made according to the GB/T6346-2015 standard. The Panasonic PLC programmable controller (FP-X0 L40R) is selected to control, all the parameters and the working status of the instrument are displayed and set on the 7-inch color touch screen (TK6070iH), the output of the oscilloscope is monitored, the output of the instrument is monitored by oscilloscope, and the output of the instrument is monitored by oscilloscope. With over-current and over-voltage protection circuit, and equipped with safety switch test box.

Technical parameters of[Safety capacitor charging and discharging test rig]

(non-standard customizable)

5600C/3p

1. Output DC voltage: 0 ~ 500V, continuously adjustable;

2. Numerical accuracy: ±3% ±3 words;

3. Test station: 3 bits, synchronous status;

4. Three channels, each charging current: ≤ 1A;

5. Maximum capacity of each test capacitor: 1uF;

6. Maximum discharge rate: 100V/ μ s

7. Its error: ±15%

8. Charge and discharge time: 0.1-999.9 S

9. Its accuracy: ±3%.

10. Charge and discharge times: 0 ~ 999999 Number of times.

11. Its accuracy: ±1;

Maintenance and regular maintenance of[Safety capacitor charging and discharging test rig]

Maintenance:

In order to prevent electrical shock, please do not lift the lid of the instrument. All parts in this instrument need not be maintained by the user. If the instrument is abnormal, please seek maintenance from our laboratory. The attached circuit and block diagram are for reference only.

Regular maintenance:

The AC power supply, input power cord accessories and so on must be carefully checked and checked at least once a year to protect the safety of the user and the accuracy of the instrument.

..

For more information about products, please contact us and visit the company.

Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou

Tel: 86-20-37896688

Fax:86-20-37896699

Mobile phone: 86-13711272581,Miss Liu

Web site: