PSC-T54U Non-Contact Infrared Pyrometer for Glass Industry Applications
PSC-T54U
Infrared Pyrometer for Glass Industry Applications
PSC-T54U Non-Contact Infrared Pyrometer Description
The digital PSC-T54U is designed specifically for glass surface applications. Offering a wide temperature range from 350° to 1200°C, it is essential for thin glass surface measurement.
The robust and compact stainless steel housing ensures operation under even the most difficult ambient conditions.
With a minimum response time of only 60 ms, the PSC-T54U is ideal for fast measuring tasks and spot sizes from 5mm.
The standard 0/4 to 20 mA linear output signal allows seamless integration into existing measurement and control systems. The PSC-T54U boasts a galvanically isolated RS-485 interface and therefore is bus-compatible and uses Modbus RTU protocol.
PSC-Spot software enables simple parameter adjustment of emissivity, sub temperature ranges, response time and data storage when joined to a PC through an RS-485 to USB connection.
PSC-T54U Non-Contact Infrared Pyrometer Features
• Designed for non-contact temperature measurement of ultra-thin glass • Temperature Range: 350° to 1200°C
• High Resolution Optics – Field of View 70:1
• Compact, Rugged Stainless Steel Housing with Protective Hardware for Harsh Environments
• Digital RS-485 and Analog 4-20mA Interfaces for Ease of Installation in Existing Measurement & Control Systems
• Worldwide Application Specialist Support
PSC-T54U Non-Contact Infrared Pyrometer Specifications
| Temperature Range |
350° to 1200°C (662° to 2192°F) |
| Sub Temperature Ranges |
Adjustable via RS-485 Interface Within Overall Temperature Range, Minimum Span 50°C |
| Spectral Range |
7.8µm |
| Distance Ratio |
Approximately 70:1 5.3mm at 370mm |
| Accuracy |
0.6% of Measured Value in °C or 1K |
| Reproducibility |
0.3% of Measured Value in °C or 0.5K |
| NETD |
|
| Response Time (t90) |
60 ms (min.), Adjustable via RS-485 with PSC Spot Software |
| Emissivity |
0.200 to 1.000, Adjustable via RS-485 |
| Peak/Valley Picker |
Maximum/minimum data storage, Adjustable via RS-485 |
| Output |
0/4 to 20 mA, Temperature Linear, Max Load 700 Ω |
| Interface |
RS-485 (galvanically isolated), half duplex, max. baud rate 115 kBd, data protocol Modbus RTU |
| Alarm Relay |
1 opto relay, R Load mind. 48 Ω (galvanically isolated) adjustable within temperature range |
| Software |
PSC Spot for Windows® |
| Parameters |
Emissivity, Response Time, Data Storage, Sub Temperature Range, Transmissivity, Ambient Radiation, adjustable via RS-485 |
| Power Requirement |
24 V DC ±25%, Residual ripple 500 mV |
| Power Consumption |
Max. 1.5W |
| Operating Temperature |
0° to 70°C (32° to 158°F) |
| Storage Temperature |
-20° C to 70°C (-4° to 158°F) |
| Weight |
Approx. 600g (1.32 lb.) |
| Housing |
Stainless Steel Round Housing with Connector |
| Dimensions |
Length: Approx. 105mm Diameter : 50mm |
| Protection Class Rating |
IP 65 (According to DIN EN 60529 and DIN 40050) |
| CE Symbol |
According to EU Regulations (EN 50 011) |
| Standard Equipment |
PSC-T54U, Operation Manual, Inspection Sheet, PSC Spot for Windows® Software (Without Connection Cable – Must Be Ordered Separately.) |
Send Inquiry to This Supplier
You May Also Like
-
MX600 MX500 MX300 MX200 Wind Speed Sensor Weather MonitoringNegotiableMOQ: 1 Piece
-
WQ-COND Rugged Water Conductivity SensorNegotiableMOQ: 1 Piece
-
WQ600 Rugged Oxygen Reduction Potential (ORP) SensorNegotiableMOQ: 1 Piece
-
SG01S-18 Broadband SiC Based UV Photodiode A = 0.06 Mm2NegotiableMOQ: 1 Piece
-
SG01S-5 Broadband SiC Based UV Photodiode A = 0.06 Mm2NegotiableMOQ: 1 Piece
-
GP2Y0A41SK0F Distance Measuring Sensor Unit Proximity SensorNegotiableMOQ: 1 Piece
-
TCS2000 Toroidal Conductivity SensorsNegotiableMOQ: 1 Piece
-
ENV-40-ORP ORP ProbeNegotiableMOQ: 1 Piece
-
ENV-50-ORP Industrial ORP ProbeNegotiableMOQ: 1 Piece
-
GUVV-T10GD-L UV Sensor for Full UV Band MonitoringUS$ 13 - 20MOQ: 1 Piece