Home > Products > AAC Ferry Cart > Dry Auminum Powder For AAC
Dry Auminum Powder For AAC
Negotiable
/ Set
1 Set(Min.Order)
- 0 Set / Sets per Month
- T/T L/C D/P D/A
- 7 days
You May Like
Product Details
Brand Name: | Kingstyle | Place of Origin: | China | Model Number: | GAN-80 |
Product Description
AAC Aluminum Powder
1.Active aluminum : 90
2.Dry aluminum powder
3.Good dispersion
4.Non-volatile :80
Grade - |
- D50UM |
Non-Volatile (%±2) |
Active aluminum % min |
Sieve residue % (45um) |
Water dispersible |
GAN-80 |
- --- 23-28 |
98 |
90 |
4.5 |
Without agglomerate Blance |
- |
- |
- - - |
- - - |
- - - |
- - -- |
-
Remark : Particle size and sieve residue according to the customer request to production
-
200-220g-Each set square brick
-
-
AAC manufacturing plants are simple in operation
-
Preparation of the raw material Fly ash(sand), gypsum: The slurry is the admixture of fly ash (sand) and gypsum. Mixed fly ash (sand) and gypsum in certain proportion in the slurry mixer tank, and then add water into slurry; finally, we can get the appropriate concentration slurry, and then it will be pumped by slurry pump into slurry tanks for pouring. Quicklime: Massive quicklime is transported and stacked in the lime material shelter. The lime block is broken by jaw crusher, and then the belt conveyor will deliver it into ball mill; the ball mill will grind the lime into powder. Finally, the lime powder will be elevated into lime powder silo for reservation. Cement: Use of bulk cement. Bulk cement is transported to the plant site by truck and then pumped directly into cement silos for reservation. Aluminum Powder: Aluminum powder or aluminum powder (paste) in barrels purchased from market are stored in aluminum powder warehouse. The worker will weigh it, and then put it into aluminum mixer, then make a 5% suspension for reservation. Recirculating slurry: Trims and scraps from cutting will fall into chute under the cutting machine. The water washes the scrap into the waste slurry tank. After mixing to a certain concentration, the waste slurry pump will pump it into the waste slurry tank. Batching, Mixing, Pouring and Pre-curing Lime and cement was delivered into electronic powder scales by single screw pipe feeder. Through cumulative measurement, the unloading devices will dump them into pouring mixer. Though the slurry tank valve, the fly ash (sand) pulp went into slurry tank, and then pumped into ingredients ceiling for measurement by electronic scale; when the weight of slurry achieve the requirement; the automatic control system stop putting slurry down by turn off the tank valve. The measured slurry will be put into pouring mixer Aluminum is measured by manual, and then put into aluminum mixer for making suspension which was once per mold. The beaten suspension was put into pouring mixer directly. The temperature of slurry should be reached the process requirement before pouring.If the temperature is not enough, it could be heat by steam. When pouring, ferry cart carry the mold to the position under the pouring mixer, and then the pouring mixer put slurry into mold for pouring.After pouring, the mold with slurry will stay in the pre-curing room for 2-3 hours. During this period, the aluminum powder will react, and the hydrogen will be released under the action of Si and Ca material. The slurry will become the solid cake, and volume expand. Cutting and Grouping After pre-curing and reach the cutting intensity (tested by special instrument or determined by production experience), the cake will be transported to cutting position through turning crane. The turning hoister will turn the mold in 90 degree and strip off the mold frame, and the cake will stand in the side plate. Finally, the longitudinal cutter and traverse cutter will cut the cake. After the cake was cut, the crane will transport it to the hardening carriage and group it in front of autoclave. Curing and Leaving autoclave The low speed winch will load grouped cake to the autoclave for curing. The cake will be in isopiestic pressure environment about 7-10 hours, and the vapor pressure is 1.3Mpa. The temperature of the autoclave is about 190°C–210°C. Cured cake will be pulled out of autoclave by low speed winch, and the end product will be transported manually to truck or store at the storage yard. Then hardening carriage and side plate will be return for recycling. Then the worker will assemble the mold with mold frame and side plate, and clean and oil it foContact Us
- AAC Equipment Online Marketplacec
- Contact nameMrs. Sunny Chen
- Phone86-755-10023930
- AddressNO.308-310 ,B BLD, Xanadu Creative Park,Ping Shan 1 Road,Taoyuan Street ,Nanshan District Zibo,Shandong
Product Categories
New Products
- Laboratory Jig Dyeing Machine
- Lab Bobbin Yarn Dyeing Machine
- Lab Scale Textile Fabric Electric Magnetic Printing Dyeing Machine
- Sample Size Garment & Ribbon Dyeing Machine
- Factory Price Laboratory Fabric Infrared Dyeing Machine in Stock
- 4 Drums Lab Leather Dyeing Machine
- Laboratory Jig Dyeing Machinewith Touch screen Factory Price
- Lab Scale Continuous Stenter machine Drying machine
- High Temperature High Pressure Bobbin Yarn and Fabric Sample Dyeing Machine
- Fiber Yarn HTHP Jet Hank yarn Dyeing Machine
- High Quality Vertical Horizontal Type Pneumatic Heavy Duty Padder for Dyeing
- Lab Textile Fabric Dyeing Machine Sample Size Garment & Ribbon Dyeing Machine
- Automatically Cotton Wool Lab Bobbin Yarn Dyeing Machine
- Rope High Temperature Jet Dyeing Machine Lab High Quality Dyeing Machine
- High Quality Textile High Temperature Dyeing Machine
- MIni Size Laboratory Yarn Dyeing Machine up to 8L
- High Quality Infrared Lab Textile Dyeing Machine
- High Quality Lab Textile Hank Yarn Dyeing Machine
- Automatic HTHP Fiber Yarn Dyeing Machine Lab Textile Dyeing Machines
- lab Scale Multi-Drum Leather Dyeing Machine
- Lab Use High Temperature Dyeing Machine With A Programmable Intelligent Computer Control
- High Temperature Dyeing Machine
- Laboratory Fabric Jig Dyeing Machine
- Pneumatic Heavy Duty Padder With Horizontal and Vertical Type
Popular Searches
Find Similar Products By Category
- Machinery > Apparel & Textile Machinery > Textile Machinery > Textile Dyeing Machines
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mrs. Sunny Chen
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Contact supplier for lowest price
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-