AAC production line Pouring Mixer for mixing concrete body before casting

Delivery Time:30 days
Certification:GMC,ISO

Pouring Mixer

Description:

a)   Uses

The casting mixer (refer to the picture) is used for mixing concrete body before casting. It is located on the casting blank mold.

b)  Technical Parameter

Max Outside Dimension Length:2380 mm  Width:2380 mm  Height:4655 mm

Weight:～3650kg motor type:Y280M-6 power:55KW rotate speed:980r/min drum volume:V=5.0m3 Mixing type:Deflector type Mixing speed:520r/min Pneumatic butterfly valve:D67IJ-10-250

c)  Structure

The casting mixer is composed of mixing drum and casting arm.

The mixing drum is cylindrical and it is compose of motor, mixing shaft and mixing blade. The sprue gate is controlled by the pneumatic butterfly valve. Work principles The casting mixer adopts push-type method, which make the mixing very quickly. It is driven by the motor, and the motor is rotated as clockwise direction to drag the mixing blade to rotate, and make the material turn in the drum. The casting arm is located under the mold. The butterfly valve starts when the mixing material is acceptable, and the material will goes into the casting arm and then start the casting.

d)  Quick-wear part

no	name	type	remark
1	motor	Y280M-6  55KW
2	pneumatic butterfly valve	DN250
3	Bering seat	SN226
4	bearing	6226
5	bearing	22226
6	triangle belt	C type  Ld=3080
7	mixing fan	∮640
8	gas cylinder	SI125×600
9	bearing	6206