Three R/D Screw Auto PET Preform Injection Molding Machine For Household

Delivery Time:35Days
Certification:ISO9001:2000, CE

Three R/D Screw Auto PET Preform Injection Molding Machine For Household

Quick Detail:

HI-P328 PET Preform Injection Molding Machine is special for PET perform injection molding, clamping force 328tons, real shot weight 1500g.

Machine main components adopt world famous brand, e.g.:
• Controller:TECHMATION (TAIWAN),
• Low voltage contactor: SCHNEIDER(FRANCE),
• Low voltage air switch: SCHNEIDER(FRANCE),
• Proportional Valve: Dofluid HNC(TAIWAN)
• Oil pump: VICKERS(USA)
• Directional Valve: VICKERS(USA)
• Induction travel switch: OMORON (JAPAN)
• Inductor potentiometer: FORT(USA)
 

Description:

HI-P328 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 21:1 / 23:1 / 25:1, are available, this machine is used to produce PET performs with weight 18g-750g, neck size 15mm to 120mm.

HI-P328 PET Preform Injection Molding Machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages.
 

Applications:

Available mold cavities on HI-P328 PET Preform Injection Molding Machine:
For PET perform 16g-48g, 28mm PCO, 25mm/30mm, 38mm, mold cavity can be: 8-Cavities, 16-Cavities, 24-Cavities, 32-Cavities, 48-Cavities,
For PET perform 50g-750g, 45mm oil neck, 55mm gallon bottle preform, 60mm-120mm wide mouth, mold cavity can be: 1-Cavity, 2-Cavities, 4-Cavities, 6-Cavities, 8-Cavities, 12-Cavities, 16-Cavities,

Specifications:

HI-P328 Technical Parameters

HI-P328	Parameters (Special design for PET)
TECHNICAL PARAMETER TABLE	Unit
INJECTION UNIT	SCREW DIAMETER	mm	75
SCREW L/D RATIO	L/D	25
SHOT VOLUME(THEORETICAL)	cm3	1502
INJECTION WEIGHT(PET)	g	1590
INJECTION PRESSURE	Mpa	146
INJECTION RATE	g/s	350
PLASTICIZING CAPACITY	g/s	71
SCREW SPEED	rpm	0-160
CLAMPING UNIT	CLAMP FORCE	Kn	3280
OPEN STROKE	mm	670
MAX.MOULD HEIGHT	mm	680
MIN.MOULD HEIGHT	mm	240
SPACE BETWEEN TIE BARS	mm	660×660 (W×H)
EJECTOR FORCE	Kn	65
EJECTOR STROKE	mm	160
GENEREL	EJECTOR NUMBER	n	13
PUMP PRESSURE	Mpa	16
PUMP MOTOR POWER	KW	37
HEATI