Horizontal Fully Automatic PET Preform Injection Molding Machine For Industrial

Delivery Time:35Days
Certification:ISO9001:2000, CE

Horizontal Fully Automatic PET Preform Injection Molding Machine For Industrial

Quick Detail:

HI-P268 PET Preform Injection Molding Machine is special for PET perform injection molding, clamping force 268tons, real shot weight 1100g.

Machine main components adopt world famous brand, e.g.:
• Controller:TECHMATION (TAIWAN),
• Low voltage contactor: SCHNEIDER(FRANCE),
• Low voltage air switch: SCHNEIDER(FRANCE),
• Proportional Valve: Dofluid HNC(TAIWAN)
• Oil pump: VICKERS(USA)
• Directional Valve: VICKERS(USA)
• Induction travel switch: OMORON (JAPAN)
• Inductor potentiometer: FORT(USA)

Description:

HI-P268 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 21:1 / 23:1 / 25:1, are available, this machine is used to produce PET performs with weight 18g-600g, neck size 15mm to 120mm.

HI-P268 PET Preform Injection Molding Machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages.
 

Applications:

Available mold cavities on HI-P268 PET Preform Injection Molding Machine:

For PET perform 18g-20g, 15mm-20mm, mold cavity can be:  8-Cavities, 12-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,

For PET perform 16g-48g, 28mm PCO, 25mm/30mm, 38mm, mold cavity can be:: 8-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,

For PET perform 50g-500g, 45mm oil neck, 60mm-120mm wide mouth, mold cavity can be:: 2-Cavities, 4-Cavities, 6-Cavities, 8-Cavities, 12-Cavities,

Specifications:

HI-P268 Technical Parameters

HI-P268	Parameters (Special design for PET)
TECHNICAL PARAMETER TABLE	Unit
INJECTION UNIT	SCREW DIAMETER	mm	70
SCREW L/D RATIO	L/D	25
SHOT VOLUME(THEORETICAL)	cm3	1100
INJECTION WEIGHT(PET)	g	1166
INJECTION PRESSURE	Mpa	147
INJECTION RATE	g/s	380
PLASTICIZING CAPACITY	g/s	60
SCREW SPEED	rpm	0-190
CLAMPING UNIT	CLAMP FORCE	Kn	2680
OPEN STROKE	mm	550
MAX.MOULD HEIGHT	mm	600
MIN.MOULD HEIGHT	mm	230
SPACE BETWEEN TIE BARS	mm	570×570 (W×H)
EJECTOR FORCE	Kn	65
EJECTOR STROKE	mm	150
GENEREL	EJECTOR NUMBER	n	9
PUMP PRESSURE	Mpa	16
PUMP MOTOR POWER	KW