High Torque 800Hz 3200W CNC Milling Machine Spindle With DSP Digital Control System

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

High Torque 800Hz 3200W CNC Milling Machine Spindle With DSP Digital Control System

Features:

1. With advanced DSP digital control system, TEMEI CNC wood router can process both 2D and 3D engraving. 
2. High safety and performance
3. Adopts imported lineal guide rail which are more precise, durable and less noisy. 
4. Y axises are driven by dual stepper motors and transmitted by gear rack, fast and steady, up to 18m/min. 
5. Various power of spindles. 
6. Compatible with all engraving software, and USB connection is optional. 
7. Breakpoint memory function is available. So wood routers will not be affected even with power failure or tools are broken.
8. Vacuum absorb table can absorb the wood tightly, and dust collector will keep your table clean and less dust in the workshop. Both of them are optional.

Specifications:

Spindle mode:NYM105-9-24Z/3.2
Spindle parametric:                                    Overall size(mm):
Frequency:800Hz                                       D:105
Rotating speed:9000-24000rpm                         D1:78
Power:3.2Kw                                           L:250
Voltage:380V                                           L1:37
Electric current:8A                                      L2:31
Connect mode:ER20
Tool holder’s diameter:1-13mm(Factory standard: 2 fillings)
Taper hole of spindle runout:≤0.003mm
Mandrel runout:≤0.008mm
Lubricating mode: grease
Cooling mode:water
Bearings mode:2*7005   2*7003
Weight:15.5KG

Description:

The assemble and install step is adjusted according to standard correction program when tightening the nut and is tightened by torque wrench within criterion, which make us not to correct the spindle by adjust the nut. Our high speed motor spindle utilizes hydraulic pull weights imported from German to measure the spindle’s pull accurately. The GDZ High Speed Motor Spindle researched and developed by our company has low noise and high accuracy characteristics. It adopts two-pole to six-pole motor-driven system and the spindle is made by the nickel chromium molybdenum alloying steels through standard heat treatment program to reach the requirement of high accuracy and stability. Depth of parallelism within 0.002mm and Perpendicularity within 0.002mm are necessary. Balance test should use the computerized balancer machine to check the precise balance of spindle with full speed. Assemble and install area’s temperature is controlled by the thermostatic air conditioner within accurate fit tolerance. The spindle leaving the factory is promised to run all for an integral test process so that the time of machine tool manufactors’ running time and machine tools delivery time could all be shortened.

Applications:

This product is suitable for Engraving machine or Engraving and milling machine and Lock industry. It is mainly used for the circular carving and drilling and milling of the hardware, glassworks and woodworks.

Product features:

 High rotating speed used for engraving and milling or fine machining. This product has wide application.  The durable years of the Bearings gets more longer.,Low noise, little vibration, good stability, high processing precision  Infinitely variable speed transmission for frequency changer with wide speed range  The front end of the bearing use the water-cooling equipment , the cooling effect of the spindle is better. Adopt the ceramic core Aerial plug, more safe and reliable  Constant power spindle with low rotating speed and high torque; Low rotating speed used for drilling and milling or rough machining; 

After-sale protection:

Machine quality assurance last for a year,Bearing warranty last for half a year,.

Notes for Use of Motor Spindle: 

 Before using the water-cooled motor spindle, it must be ensured that the cooling system is working properly and working without cooling condition is strictly forbidden. .  Coolant must be clean and free of grease. Temperature should be controlled in 5 to 30 degrees. If the ambient temperature is above 30 degrees, the cooling medium must be forced to cool. Precision machining machine requires coolant temperature at 20 degrees positive or negative 2 degrees.  In the process of saving and transporting motor spindles, the high speed grease in the bearings could be changed. So before using, the spindles should run in low speed for a period time at first. Running must start from the minimum speed of the spindle and add speed to differential growth by 3000rpm after 30 minutes. Each level is run in 20 minutes. If just start using in high speed without running, abnormal noise and heat would happen then the using life will be shortened. In the long-term use of the electric spindle, it should be working(in low speed) at least 15 t