Changchun Boiler Softened Water Equipment for Factories

　　Changchun boiler softened water equipment for factories

　　Model selection

　　1. In order to save the cost, manual control system can be selected according to the practical conditions.

　　2. If the user uses water without stop during 24 hours, alternative regeneration can be selected according to the water time, one-use and one-standby.

　　3. Based on the requirements of water quality: single-stage can be configurated multi-media filter, in order to remove the mud and sands, iron rust, colloids and suspended substances; double-stage can be configurated active carbon filter, to remove the pigment, odor, biochemical organic substances, reduce the residual chlorine and pesticide pollution; three-stage can be configurated softened water equipment.

　　4. Time control-timing type; flow control-flow type. In the run, single-tank, double-tank and multi-tank etc many combinations can be selected, according to the practical needs, the users can select different type. In operation, this product has not only the automatic operation, but also manual operation.

　　Technical index:

　　1. Inlet water index: 0.18-0.6Mpa;

　　2. Working temperature: 1-55℃;

　　3. Source water hardness: <8mmol/L;

　　4. Operation mode:automatic/manual

　　5. Output water hardness: ≤0.03mmol/L;

　　6. Regenerant: sodium chloride(NaCL)

　　7. Regeneration mode:downflow/backflow

　　8. Exchanger: 001*7 strong acid ion exchange resin;

　　9. Control mode: time/flow;

　　10. Working power source: 220V/50Hz.

　　Application scopes:

　　It is widely used in the supplemental water softening of steam boiler, hot water boiler, exchanger, condenser, air-conditioner, direct-fired machine and so on. It is also can be used in domestic water treatment of hotels, restaurants, office-building, flats and so on, furthermore, the softened water treatment of the food, beverage, wine, washing, dyeing and printing, chemical, hospital and so on.