Factory Supply LPG Filling Truck 5m3 LPG Bowser Truck
Factory Supply LPG Filling Truck 5m3 LPG Bowser Truck.
CLW production 5m3 5000L 5000 liter LPG bowser truck
|
Tank vehicle |
ITEM |
DATA |
Tank |
ITEM |
DATA |
|||
Chassis |
EQ1090KJ |
Design Pressure |
1.77Mpa |
|||||
Engine Out put |
120HP |
Design temperature |
50° |
|||||
Kerbweight |
Kg |
Capacity |
5m³ |
|||||
Payload(Product weight) |
2100Kg |
Filling medium |
LPG(Propane) |
|||||
Gross Vehicles Weight(GVW) |
6950Kg |
Tank material |
Q345R |
|||||
Pressure of leak test |
1.77MPa |
Corrosion allowance |
1.00 mm |
|||||
|
External Dimensions (Length*Width*Height) |
6295*2180* 2510 |
Heat treatment method |
PWHT |
|||||
Tank mass |
1650 kg |
|||||||
Full load |
front axle load |
2400kg |
Hydraulic test pressure |
2.66Mpa |
||||
Rear axle load |
4200kg |
External Dimensions (In-Diameter*Thickness*length) |
1500*10(8)*3600
|
|||||
Max.vehicle roll angle |
35° |
|||||||
Design the limited velocity |
Straight road |
90 km/h |
Vessel’s sort |
The third kind |
||||
Turning |
25 km/h |
Service Years |
1ten years |
|||||
|
Urgency Switch Valve |
Tape |
QGJ43F-2.5 |
Safety valve |
Tape |
A412F-2.5 |
|||
Nominal Pressure |
PN2.5Mpa |
Model |
Inner full liff |
|||||
Nominal Diameter |
Gas Phase |
DN25mm |
Nominal Pressure |
PN2.5MPa |
||||
Liquid Phase |
DN50mm |
Nominal Diameter |
DN80mm |
|||||
Operation Way |
Manual |
Opening Pressure |
1.86-1.95MPa |
|||||
Closing Time |
10sec |
Closing Pressure |
>1.49MPa |
|||||
Melting switch temperature |
70±5°
|
Complete Opening Pressure |
<2.12MPa |
|||||
|
Indicator for liquid level |
Tape |
UQZ-2.5-1500 |
Load and unload system |
Valve type |
Q41F-2.5P/CQA41F-2.5p |
|||
Model |
float trap |
Nominal Pressure |
PN2.5MPa |
|||||
Nominal Pressure |
PN2.5MPa |
Tie-in model |
Quick tie-in |
|||||
Surveying range |
0-1500 |
Gas phase pipe |
DN25mm |
|||||
Precision |
2.5 level Grade |
Liquid phase pipe |
DN59mm |
|||||
CLW factory's different LPG tanks products
LPG bowser truck packing and shipping: nude, covered with wax , shipping in RO/RO operation; in Bulk carrier. According to your request.
Chengli Special Automobile Co.Ltd is located in Hubei Province, China, which is the largest special automobile manufacturer in Hubei.
Location is near Wuhan Tianhe airport, convenient to pick up clients to visit our factory.
Factory covers an area of 8 hectares, more than 6000 employees.
China top 500 private manufacturing enterprises in 2013-2016.
Factory overview :
Contact person
Send Inquiry to This Supplier
You May Also Like
-
Sinotruck Howo 6x4 25000 Liter Water Tank Truck PriceUS$ 30,000 - 50,000MOQ: 1 Unit
-
Dust Cap / Tank Truck Spare Parts/anti Dust Cap/quick Coupling Dust CapUS$ 15 - 20MOQ: 10 Pieces
-
4x2 NQR Used 10ton Water Tank Truck for SaleUS$ 25,000 - 35,000MOQ: 1 Unit
-
Light Weight Waterproof Honeycomb Sandwich Panel as Tanker CoverNegotiableMOQ: 300 Square Meters
-
High Quality Dongfeng 10,000Liters-15,000Liters Water Tanker Truck for SaleUS$ 20000 - 30000MOQ: 1 Piece
-
Water Tanker Diesel Street Cleaningtruck Road SweeperNegotiableMOQ: 1 Unit
-
Water Tanker Truck Price for Dongfeng 4X2 6X4 Water Spray Truck,Sprinkler Tank Truck Shacman Water Tanker Trucks,10 Cbm 12cbm 20m3 Water Tank Truck for Hot SaleNegotiableMOQ: 0
-
3-Axle Chemical Liquid ISO TankUS$ 10000 - 99999MOQ: 1 Unit
-
Sinotruk Howo 4x2 5000 Liters Fuel Tank Truck Oil TankerUS$ 9,000 - 13,000MOQ: 1 Unit
-
18000L Beiben North Benz NG80 6x4 Water Tank Truck 340HP 2634 Low Price for Sale in ChinaUS$ 35000 - 44500MOQ: 1 Unit













