Specifications
1.Adopt multi feed design2.Has high gain and wide beam width
3.Mulit-path rejection board
4.Lightning proof circuit
Specifacations of Choke Ring Antenna HX-GG486A
| Choke Ring Antenna HX-GG486A | |||
| Antenna Specification | Frequency Range: GPS L1/L2, GLONASS L1/L2 | ||
| Impedance: 50 Ohm | |||
| Polarization: RHCP | |||
| Axial Ratio: ≤ 3 dB | |||
| Azimuth Coverage: 360° | |||
| Output VSWR: ≤ 1.5 | |||
| Gain at Zenith: ≥ 6 dBi | |||
| Phase Center Error: ± 1 mm | |||
| LNA Specification | LNA Gain: 50 dB | ||
| Noise Figure: ≤ 2.0 dB | |||
| Output VSWR: ≤ 2.0 | |||
| Ripple: ± 2dB | |||
| Drain Voltage: 3--18 VDC | |||
| Current Consumption: ≤ 35 mA | |||
| Group Delay: ≤ 5 ns | |||
| Mechanical Specification | Dimension: φ322 x 261 mm | ||
| Connector: TNC Female | |||
| Weight: 4920g | |||
| Environmental Specification | Operating Temperature: -40°C to +85°C | ||
| Storage Temperature: -55°C to +85°C | |||
| Humidity: 95% Non-Condensing | |||
Send Inquiry to This Supplier
You May Also Like
-
Outdoor/Indoor 2400-2483 MHz/2.4GHz 12dB Omnidirectional Fiberglass WIFI AntennaNegotiableMOQ: 100 Pieces
-
2.4G 802.11b/g/n 20W WIFI Signal Booster With 1000mW 2.4GHz Wifi Signal Booster 20W for 5km Outdoor WifiUS$ 5 - 40MOQ: 1 Piece
-
698-2700MHz 3x1 RF Hybrid Combiner 3 in 1 Out n Female Connector DC-3GHzNegotiableMOQ: 1 Piece
-
50 Ohm DC-3GHz 10W Dummy LoadUS$ 1 - 25MOQ: 1 Piece
-
Communication Relay Board S42024-L3237-A107US$ 10 - 2,000MOQ: 1 Piece
-
Optical SplitterUS$ 55 - 95MOQ: 100 Sets
-
UFL Base IPEX/UFL Connector for rf Cable Antenna and PCB ModuleUS$ 0.16 - 0.32MOQ: 100 Pieces
-
2400-2483MHz Wifi Fiberglass Omni 2.4ghz Dipole 9dBi AntennaNegotiableMOQ: 100 Pieces
-
Uhf & Vhf 433 MHz 5dB Omnidirectional Fiberglass Walkie Talkie AntennaNegotiableMOQ: 100 Pieces
-
Ameison 5.8GHz 5dBi High Performance Desktop Wifi Rubber Duck External Antenna for Huawei E5172NegotiableMOQ: 1000 Pieces
