China Manufacture Gold Grinding Wet Pan Mill with High Efficiency

pan mill will be packed in standard container, and the spare parts is packed in wooden cases;main engine nude packing, container, or upon customers requirement.

China Manufacture Gold Grinding Wet Pan Mill with High Efficiency

What is the Description of our gold grinding wet pan mill ?

The gold grinding wet pan mill is named by the diameter of roller. Φ1300,Φ 1350,Φ 1400,Φ 1500,Φ 1600 is suitable for selection of iron ore, molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore. Above all, 1200a type is the most popular and widely use.

As their small investment, high yield, the production cost is low, good benefits, praised by users, domestic alternative to the ball mill equipment. Grind gold machine easy installation and maintenance, small investment, high yield, quick, low-cost production, is the ideal equipment for  small and medium-size gold miner's beneficiation.

What is the Advantages of our gold grinding wet pan mill ?

Gold grinding machine gold wet pan mill characteristics: grind gold through the raw material mixing, rolling, crushing, rolling repeatedly reach moisture equilibrium ratio of uniform, low gas content, improve the forming rate and forming quality, grind the material through the machine molding Products with high density, good strength, no porosity ratio weight. Energy efficient, high volume of output, the product is used for iron ore process tailings recovery, not to slag the loss of effective resources can be fully utilized .

As their small investment, high yield, the production cost is low, good benefits, praised by users, domestic alternative to the ball mill equipment. Grind gold machine easy installation and maintenance, small investment, high yield, quick, low-cost production, is the ideal equipment for mine small and medium gold miners mining beneficiation.

What is the Features of our gold grinding wet pan mill?

1.Wet pan mill suit for mineral processing after the installation is completed to gold grinding machine groove bottom 5 kilograms of mercury begins normal operation.
2.Each class receive once the Sands, the shift added to 1 kg of mercury to receive the grind at the end of the Sands and mercury, the mercury received  gold equipment, with a relatively high density of red cloth mercury screwed out to the package, open the red cloth which left Sands. One kilogram of mercury each class started on it. Containing one is grasping the cloth of gold or grab the gold behind the blanket and put on the mercury board can receive the gold.

What is the Working Principle of our gold grinding wet pan mill?

1.When inputting gold sand into the rolling drum, the rollers compress the sand over and over into tiny particles.
2.Please put in 5 kg mercury at first, the mercury can absorb the gold or other metals.
3.At last, use a high-density red cloth to wrap mercury up.
4.Then squeeze it, the mercury will be pressed out and pure gold stayed.
5.As to the large capacity, we can use mercury shaking machine and mercury steamer to replace the manual work.

What is the Operation and Maintance of our gold grinding wet pan mill ?

1.The raw material should be put into the machine after the machine running normally.

2.This machine is not allowed to state with the material in the machine. If the machine is stopped because of stoppage, the residual material in the machine should be cleared. Then start the machine again.

3.The material should be put into the machine uniformity, not sometimes much sometimes less. It's better to use a feeding equipment.

4. The bearing part should be add butter regularly.

5.Every bolts should be checked to avoid flexible.

6.The bearing should be changed in time if it is damaged to avoid damage other parts.

7.While the machine is running formally, you should check if there is abnormal sound in the reducer box and or bearing part, if there is a too high temperature, if there is too big motor current and so on. If it happened, you should stop the machine to remedy of the trouble.

8.The motor V-belt should be removed while examine and repair the machine for your safe.

What is the Parameter of our gold grinding wet pan mill?

PS:For example,the model 1200A, the size is 1200*200*80*250±20mm,

1200 refers to the diamater of grinding wheel is 1200±20mm,

200 refers to the thickness of grinding wheel is 200±20mm,

Products Show of our gold grinding wet pan mill?

Packaging & Shipping ,Trade Terms:

Development History:
A).Established Magnet Research Institute in 2004,successfully developed the high gradient magnetic separator to 12000-22000GS.
B).Cooperated with Shandong Gold Group and doubled the sales scale.
C).Developed STL-120 gold centrifugal concentrator in 2008.
D).Mature dredger products in 2009.
E).Developed successfylly knelson smiliar type automatic discharge type gold centrifual concentrtor and produced them in large quantity for sellling.
F).Established Shandong Hengchuan International Trade Co.,Ltd in 2015.

How to Contact Us?