Turbo Rim Diamond Blade for Hard Masonry Material - -MAAK

Specifications

Turbo Rim Diamond Blade for Hard Masonry Material
1.high quality and fine price
2.low noise
3.long lifetime
4.goods in stock

 

MAAK   Turbo Rim Diamond Blade for Hard Masonry Material

 

Normal cutting speed( for dia.105mm):

	grade 00	grade 01	grade 02	grade 03	grade 04	grade 05
speed: (m/min)	0.8-1.0	1.0-1.5	1.5-2.0	2.0-2.3	2.3-2.8	>2.8

Bond choice as per the table below( for dia.105mm):

 * Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.Super thin turbo blade for ceramic/tile (1.30mm thickness only!)Feature and benefit:1. cutting speed (200%-300% faster)1.5-3 meter/min! This is a extremely fast cutting speed! Cause it is 200%-300% faster than normal ceramic/tile blade.2. cutting life (100%-200% longer)600-800 meter! This is extremely long life! Cause it is 100%-200% longer than the normal ceramic blade.3. smooth cutting edge without chippingIt is extremely smooth cutting edge without chipping! It may be met your high quality installation requirement! 

type	grade 00	grade 01	grade 02	grade 03	grade 04	grade 05
Fast cutting			XGA-02-002AD (XGS3) (1.6-1.7m/min) JWGA-02-002AD (YGS3) (1.6m/min)			XGA-05-002AD (XGS5) (2.8-3.0m/min) XGA-05-002AD (XGS6) (2.8-3.0m/min)
Normal	HGA-00-002A(HGS6) (0.8-0.9m/min) JWGA-00-002A (YGS4) (0.9-1.0m/min)	JWGA-01-002A (YGS1) (1.1-1.2m/min)	HGA-02-002A (HGS3) (1.5-1.6m/min) XGA-02-002A (XGS2) (1.4.-1.5m/min)	RGA-03-002A (RGS) (2.0~2.1m/min)	XGA-04-002A (XGS4) (2.5-2.6M/MIN) HGA-04-002A (HGS5) (2.2~2.3m/min)
Long life			XGA-02-002AB (XGS1) (1.4-1.5m/min)