Hydrophobic PTFE Gas Filter Cartridge for Venting Sterilizing Filtration
Hydrophobic PTFE gas filter cartridge for Venting sterilizing filtration
Specifications:
| Materials Of Construction | Filter Media: | Double-layer Polytetrafluoroethylene (PTFE) | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0, 5.0, 10, 25, 50 um | |||||
| Inner core: | Polypropylene | |||||
| Outer Cage, End caps: | Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75'') | ||||
| Inner Diameter | 28mm(1.12'') | |||||
| Length(based on DOE end caps) | 10"- 254mm, 20"- 508mm, 30"-762 mm, 40"- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10'' | |||||
| Operating Conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature: | 80℃ (172℉) at P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, Cumulative Time:15hours; | |||||
| Flush with hot water at 82℃(180℉) for 30 minutes, at P≤1.0 bar (14psi) -- Recommended. | ||||||
Hydrophobic PTFE gas filter cartridge
1) High flow rates and low pressure drop
2) High strength, long service life and cost-effective
3) Oxidation-resistant materials of construction for gas filters
4) Have a particulate removal rating of 0.01 μm in gases and a microbial removal rating of 0.22 μm in liquids
5) 100% integrity testable prior to release
Hydrophobic PTFE gas filter cartridge
1) Sterile venting of tanks
2) Autoclave vacuum break lines
3) Fermentation air applications
4) Sterile process gases
5) CIP at ambient temperature


Send Inquiry to This Supplier
You May Also Like
-
Water Bath SterilizerNegotiableMOQ: 1 Set
-
Cold Press Compactor EPS Foam Melter and Compressor Hot Melt Cold Press Crusher With Hot Melt and Cold PressUS$ 2599.00MOQ: 1 Set
-
Replaceable Knives Wood Chipper Digital Maximize Efficiency for BiomassNegotiableMOQ: 1 Set
-
M931 Pex Plastic Water Ice LineNegotiableMOQ: 1
-
Nickel-Iron FoamNegotiableMOQ: 10 Square Miles
-
Refuse IncineratorUS$ 5900 - 25000MOQ: 1 Piece
-
Portable Foam Wall Chemical Oil Proof 750 Gallon Flexible Pvc Spill Containment BermNegotiableMOQ: 1
-
More Than 20 Years Factory Supply Plastic Baler MachineNegotiableMOQ: 1 Set
-
Plastic To Oil Pyrolysis Plant (Continuous Type - 3TPD to 24 TPDUS$ 298,000 - 1,344,000MOQ: 1 Plant
-
Oil Drilling Cutting Waste ManagementNegotiableMOQ: 1 Set

