air bags for stunts

Specifications

1.Resistance to high strength and high temperature and heavy load
2. Absorption oscillation
3. Steel mill
4.OEM

The main use: This capsule is suitable for oil slurry pump air bag.

 

The physical properties:

1.Tensile strength (M Pa)                                13

2.Elongation at failure (%)                              450

3.Hardness (Shore A)                                      60-70

4.Aging coefficient (120 centigrade* 24 h)   0.8

5.In drilling fluid mud, temperature is 70 centigrade. Immersing it for 24 hours, volume expansion rate is not more than + - 10%.

 

Storage transportation use

1.Transportation, storage process: Prevent sunlight, rain, rigorous and grease, and other material contact, in order to avoid damaging the quality of capsule.

2.Storage temperature: - 5 - + 40 centigrade. Far away from the heating device more than one meter. Relative humidity is not more than 80%.

3.Storage transportation: Avoid compression or its distortion.

4. Use in the installation procedures: It is strictly prohibited to use sharp objects to knock capsule. For the least affect compressive performance.

5.Remove the mud in line, the air bag must advance pressure relief.

6. Inventory no more than one year.

 

 

Detailed specification:

 

Advantages:

1.Resistance to high strength
2. Resistance to high temperature

3. Absorption oscillation resistance to high speed

4. Resistance to heavy load 

5. Internationally advanced quality level, can be designed to meet the specific needs

 

Application:

It’s used in steel mill. When it is set between steell parts of the equipment,it can seal to make the device to start or stop.