New Hantek DSO1102B Digital Handheld Oscilloscope /Multimeter 100MHz 1Gsa/S

Hantek Technologies specializes in designing high performance measurement solutions for various industries. With continuous innovation and collaboration with specialists and engineers, Hantek now delivers a range of new-generation oscilloscopes and other leading-edge high-tech products exceeding industry standards.

• High bandwidth 60MHz-200MHz Oscilloscope,1GS/s sample rate, and 6000 counts DMM with analog bargraph
• 1M memory depth
• High refresh rate (2500 frames)
• Large 5 6 inch TFT color LCD display£¬High resolution(640*480£©, dual-window design --More clear, more detailed
• One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
• Easy-to-use pop-up menu with built-in multi-language help system
• 23 automatic measurements
• Waveform math: add, subtract, multiply, and divide
• Store and recall over
• Automatic cursor tracking measurements
• XY Mode
• Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
• Waveform recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
• Pass-Fail function compares a stored waveform to an unknown input
• Average mode for smoothing waveforms
• Square wave output (2V, 1kHz) for probe adjustment
• USB host/device 2 0 full-speed interface ,support removeable disk, LAN Optional ,easy to control by PC or long-distance
• Dimensions (mm):240(L)x165(W)x50(H), be carried easily
• LabviewVBVC second design instance
• Brand: Hantek

   

  Model	DSO1202B	DSO1102B	DSO1062B
  Oscilloscope mode
  Bandwidth	200MHz	100MHz	60MHz
  Real-time Sample Rate	1GSa/s
  Equivalent Sample Rate	25GSa/s
  Record Length(Sample Points)	Single-channel: Maximum 1M; Dual-channel:Maximum 512k
  SEC/DIV Range	2nS/div-2000S/div (in a 2, 4, 8 sequence)
  Delay Time Accuracy	500ps
  Vertical
  A/D Converter	8-bit resolution
  VOLTS/DIV Range	2mV/div¡«5V/div at input BNC
  Position Range	±50V(5V/div),±40V(2V/div¡«500mV/div),2V(200mV/div¡«50mV/div)±400mV(20mV/div¡«2mV/div)
  Rise Time at BNC	≤1.7ns	≤3.5ns	≤5.8ns
  DC Gain Accuracy	±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
  Trigger
  Trigger Sensitivity (Edge Trigger Type)	DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT£¨Typical£© 200mV from DC to 40MHz EXT/5£¨Typical£© 1V from DC to 40MHz  AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity
  Trigger Level Range	CH1,CH2: ±8 divisions from center of screen EXT: ±1.2V EXT/5: ±6V
  Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns)	CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
  Holdoff Range	100ns-10s
  Trigger Type
  Edge	Trigger on the rising or falling edge
  Pulse Width	Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s
  Video	Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
  Slope	Trigger (when >,<,=,≠) on a positive or negative slope Set Time: 20ns–10s
  Overtime	from the rising or falling edge Set Time: 20-10s
  Alternate	Internal trigger on edge, pulse width, video or slope
  Measurement
  Cursors	Manual: The difference between voltage cursors ¡÷V; the difference between time cursors ¡÷T; 1/¡÷T calculated by Hz. Tracing: The voltage and time at a waveform point
  Automatic	Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
  Meter Mode
  Max.Resolution	6,000 Counts
  DMM Testing Modes	Voltage, Current, Resistance, Capacitance,Diode & Continuity
  Max. Input Voltage	AC: 600V, DC: 800V
  Max. Input  Current	AC: 10A, DC: 10A
  Input Impedance	10 MΩ
  Display
  Type	Right angle 5.6 16-digit color LCD
  Resolution	640*480 dots
  Contrast	16 gears, with the progress bar to show adjustment
  Interface	USB host and USB slave, Lan Optional
  Power Supply
  Voltage	DC Input:12--17VDC, 1500mA
  Mechanical
  Size	245 x 163 x 52 (mm)

  
• 
• Shawn