Photoluminescent PET film and sheet

Double plastic bag, Plastic drum, Cartons

Specifications

Photluminescent PVC,PET film with adhensive
Glow in dark over 12 hrs
Safety guidance,ship, traffic usage
High fire retard

KPT company manufacture and supply various types of lighting phosphors and intruments products,including the below

 

        

PHOTOLUMINESCENT FILM AND SHEET WITH ADHENSIVE

 

 

 

Brief introduction

The luminescent film is researched and produced by ourselves.Which have excellent effects of storing any visible light and glowing.After absorbing visible light for 10 to 30 minutes,they can glow in the dark for 12 hours at least. And it can be repeated any times for storing and glowing process. And they have good performance of enduring weather with non-toxic and harmless and no any radioactivity.
The luminescent film with self-adhesive can be used onto the surface of varied equipment or article,which use is the same with hard board, even more is more convenient.Such as it can be cut into many kinds of shapes or signs and put onto the place where need.Anyway it is useful and novel.For example,it is used in furniture decoration or put onto the surface of switch,telephone,handle,stationery,toy,sport article or indication in the public area, recreation ground.

Technological Index

Model	Color	Illuminating Color	Brightness mcd/m2   (No less than)					Illuminating Time (min) (0.3mcd/m2)	Specification
			1min	5min	10min	30min	60min
KLM-M-O-030	Yellow-green	Yellow-green	1800	500	250	75	33	3000	Regular 100*1000cm 30*400cm Proportional cutting enabled in the above size Thickness 0.30-0.36mm
KLM-M-O-025	Yellow-green	Yellow-green	1500	400	190	60	28	2800
KLM-M-TOS-015	Yellow-green	Yellow-green	500	190	90	24	9	1000

 

Functions:

1. High fire retardedness by use of illuminating film made by PVC plastics
2. High capacity of saline resistant and detergent resistant
3. High capacity in cold/heat resistance
4. High mechanical functions for illuminating films
5. Strong sticking ability for illuminating films.

Usage Procedure:

1. Preferably to be applied for construction on smooth surface with the temperature of 10~40°C.
2. Cut the film into different sizes and can be directly pasted to the places like switch for decoration use.
3. Figure/ character printed on the surface.
4. Clean the surface clean before pasting. No grease mark or dust allowed on the surface.
5. The film is expandable. Be careful not to dispose it at will and recommended to keep it pressed.
6. It is prone to humidity. Preferably have it processed in environment with 40%-60% in humidity.
7. Remove the paper from back and press neatly on the surface.
8. At times, the products with different batch numbers have color differences.
9. The color films of MY, MR, MB and MG are recommended not to be used outside.
10. The film at length of 10m is likely to have junctions.

Packing and Storage

1. Packing; Curly or slice shape for handi-wrap.
2. Storage: Keep in warehouse where is ventilated, dry and cool with temperature between 15°C and30°C and relative humidity between 40% and 60%.  

 

 

 Other phosphor products are as below:

 

1. UV phosphor for anti counterfeit purpose

2. Up conversion anti counterfeit IR  phosphor 800-1550nm

3. X-ray phosphor s546 green x-ray display, detection, sensitization,application
4. EL phosphor to make el wire or el panel

5. FED,  CRT,PDP... etc.pls. contact us for any inquiry.

6. Photoluminescent pigment

 

 

                       Luminescencent Phosphors

                                           

 

Photoluminescence      

lamp Phosphors

     fluorescent lamps, energy-saving lamps, black(UV) light lamp, high pressure mercury

lamp, low pressure mercury lamp

     long afterglow phosphor

     radioactivit afterglow phosphor, super-long afterglow, long afterglow phosphor

     ultraviolet rays phosphors

     long wave 3650?, shor twave 2537 ?, vacuum ultraviolet phosphor(PDP)

     infrared phosphors

     up-conversion luminescence (Anti-Stokes),infrared stimulated luminescence,

thermoluminescence, multiphoton material,

     fluorescent pigment

     rare earth fluorescent pigment, organic fluorescent pigment, inorganic fluorescent pigment

Electroluminescent (EL)

       High-electrol DC voltage DCEL, AC voltage ACEL, thin film EL, thick film EL, organic

EL low-electrol light emitting diode (LED), OEL or OLED, silicon base Luminescent,

semiconductor laser

Cathodeluminescence

       color television phosphor (CRT)

       monochrome television phosphor

       Pixel Tubes phosphor

       low-voltage fluorescence (VFD)

       short afterglow phosphor, Long afterglow phosphor

Radiationluminescence

         α Radial phosphor,β Radial phosphor,γ Radial phosphor, scintillation crystal

X- ray Luminescent

         X –ray storage phosphor

x-ray intensifying phosphor, X-ray,

         CT scanning phosphort

Triboluminescence

       single crystal, slight crystal

Chemiluminescent

       organic compounds Chemiluminescent (Fluorescence dye)

       liquid Chemiluminescent

       rare earth organic fluorescent materials

Biology luminescent

       Enzyme luminescence, organic Luminescence,

Reflected light( geometrical optics)

       glass bead reflected optics, coating reflected optics

 

 

                                                               COMPANY PROFILE

 

 

 For the above el wire rope is made by KPT CO.,LTD, the various types of phosphor are made also by KPT CO.

 

 

OEM and ODM are welcomed too.