LED Emergency Sign Light CE & RoHS

LED emergency EXIT light

OVERVIEW

Malon emergency light, adopted high efficency LED technology, is able to conduct autonomously self testing, cutting down the consumption for failure inspection. Periodic operational and full duration test ensures the stability and persistency. The device, instantly alternating operatation status on power interruption, conflagration, earthquake, indicating precise emergency exit direction, is applicable to hotel, restaurant, shopping mall and tall building etc. This series of product are up to EN60598-2-22/GB17945-2010 Standard.

CAUTION

Keep power supply within nominal range(AC220~230V50/60Hz).

Installation must be away from hyperthermia substance, gas or exhaust pipe, avoiding overheated or ignition.

Avoidance to apply in the condition of hyperthermia, humidity or corrosive gases,the ideal temperature would between -10°C to +40°C.

Prevent to fierce vibration or collision.

Avert violent impregnant or chemical usage while device cleansing.

Avoidance electrocution, please don’t unpacking the product by amateur.

Deny for refitting components or parts of the product at discretion.

Key Figure

NOMINAL VOLTAGE      AC220~230V50/60Hz

CHARGE PERIOD        20hours

NOMINAL POWER        3W

OPERATION PERIOD     3hous

LAMP                    8*LED 

IDEAL TEMPERATURE  -5°C+40°C

BATTERY                Ni-Cd 2.4V 0.8A·h

RATED LUMEN OUTPUT  50cd/

INGRESS PROTECTION   IP20

PRODUCT FEATURE

1,Automatical power-switch alternate on emergency status

2,Overdischarge protection available

3,Rigorous design for short-unicircuit protection

4,Intelligence charging function

5,Manual test function

6,AUTOTEST every 30 days

7,Auto test on full duration every 360days

8,Sound and light alarming function

9,Manual control module under emergency status

SPECIFICATION

Primary power indication  while AC input, green LED is on; on the contrary, geen LED turns off.

Note  The device autonomously switches between operation/emergency module depend on the voltage of alternating current. When the AC voltage is between 132V to 187V, the device would operate on emergency module; when the AC voltage become normal, the device would switch the emergency status to charge status autonomously.

Charge indication  AC-input charge function. On charging status, red LED is on; while the battery is full, red LED turns off. Within the temperature -5°C to +40°C, the battery is fully charged within 24 hours.

Inspection indication  while the fuse broken or without good contact, wiring troubles, battery out of the circuit, the yellow LED is on with alarming sound.

Our factory

Delivery way

....