Home > Products > combined test chamber > SANWOOD Environmental & Shake Test Chamber
SANWOOD Environmental & Shake Test Chamber
- 15 Set / Sets per Month
- SHENZHEN SHANGHAI TIANJING
- T/T Credit Card PayPal
Product Details
Place of Origin: | Guangdong, China | Brand Name: | SANWOOD | Model Number: | SMB-3KPH |
Power: | Electronic | Usage: | Universal Testing Machine |
Product Description
SANWOOD Environmental & Shake Test Chamber
Product Description
Equipment summary:
The Environmental & Shake Test Chamber adopts independent system, with the function of vibration control system,constant temperature and humidity control system.Respectively high temperature test,low temperature test,constant temperature humidity test,vibration test,and composite test is also availalbe.It is mainly for aerospace,aviation,petroleum,chemical,electronics,communication and other scientific research and production units with temperature humidity environment,at the same time,will electric vibration stress in the test chamber on the samples applied to the fixed cycle.
Corresponding standard:
GB/T 2423 .102_2008 Electrical and electronic environment test, second part: Test methods: temperature (low
temperature, high temperature), low pressure, vibration (sinusoidal) synthesis GJB 150.24A-2009 Environmental
test methods for military equipment test, twenty fourth parts: temperature/ humidity/ vibration/ height test.
Applicable industries:
Now it has been widely used in aerospace, marine, automotive and other electronic products for environmental
adaptability, the use of reliability assessment, evaluation and the electronic product design defects in the early
detection and process defects screening and other occasions.
Techincal parameter:
The Environmental & Shake Test Chamber technical parameter:
The Environmental & Shake Test Chamber technical parameter:
Detailed Images
The Environmental & Shake Test Chamber connection mode:
Our Company
We have independent quality control department, each production process will pass through
the three test. If it is not qualified products, it will be returned to re-production.
Cost
Our Services
ALL OF OUR TEST CHAMBERS HAS ONE YEAR WARRANTY.
SANWOOD REPAIR THE EQUIPMENT IS UNDER THE ORDINARY USAGE AND ARISE ANY
HARDWARE PROBLEMS WHICH CAUSED BY PRODUCT ITSELF, RATHER THAN HUMAN
ERROR.
FIRSTLY, WE CAN PROVIDE THE SPARE PARTS WITH YOU. AND ALSO PROVIDE THE
SOLUTION ABOUT THE TROUBLE OF THE EQUIPMENTS.
SECONDLY, PLEASE SEND BACK THE EQUIPMENT, WHICH WILL BE REPAIRED BY OUR
COMPANY.
LASTLY, WE WOULD LIKE TO APPOINT OUR TECHNICAL ENGINEER TO YOUR COMPANY
TO REPAIR THE EQUIPMENT.
F A Q
1.Do you have any advantages in Environmental & Shake Test Chamber?
SANWOOD has 8000 production bases in Dongguan, China. Factory direct sales, can reduce the cost of agency for you.
2.May I ask you how do you deliver Environmental & Shake Test Chamber?
We have so many ways of Environmental & Shake Test Chamber delivery, such as FOB, CIF,etc.
3.Is there a variety of language options for your operating system?
We use Korea SAMWON controller system, it has Russian, English, Chinese, Korean and other languages.
4. How long is the warranty period of your Environmental & Shake Test Chamber?
We provide free parts replacement service for resories with one year.
5. When will you give a respond if your Environmental & Shake Test Chamber break down?
We will give you guidance by video conference when we receive your need of requirement.
UV test chamber xenon test chambers environmental chamber
The above is "Environmental & Shake Test Chamber" items, Please contact us freely, we are always here to support you. If you have any question,we can have a talk. We are partner, thank you! = =)
♥ Want to know more information welcome to contact us now!
And welcome to our company! We display more new design in our showroom.
♥ Main web site: .tw
Skype: climatic-chamber007
Contact Us
- Guangdong Sanwood Environmental Chambers Co., Ltd.
- Contact nameTracy Tang
- Phone86-0769-81182799
- AddressSanwood Industrial Park,Yuanjiangyuan,Changping Dongguan,Guangdong
- IEC 61032 Test Probe 2 with 12.5mm Test Sphere
- IEC 60529 IP4X Test Probe with 1.0mm Test Wire
- IEC 61032 Test Probe C with 2.5mm Rod
- IEC 60529 Jointed Finger Probe for IP2X Testing
- IEC 61032 Test Probe A with 50mm Steel Sphere and Nylon Handle
- ZETA-901 zeta potential measurement analyzer
- Friction Resistance Testing Machine Universal Abrasion Tester Rubber DIN Abrasion Test Machine
- ISO 4649 DIN Abrasion Resistance Testing Machine Rubber Abrasion Tester Sole Wear Test Equipment
- Manual Paper Gsm Tester Paper Testing Instrument Quantitative Knife
- Manufacturer Cardboard Quantitative Sampler Paper Disc Test Machine Paper Cutter
- Digital Film Thickness Tester Paper And Cardboard Test Machine Paper Measuring Gauge
- Digital Paper Cardboard Thickness Gauge Thickness Meter Leather Thickness Tester
- 5000N Intelligent Compression Tester Paper Tube Compressive Test Machine Paper Tube Crush Strength Testing Equipment
- Cylinder Paper Compression Test Machine Paper Tube Core Tester Ring Crush Strength Testing Equipment
- High Quality DIN Abrasion Tester Sole Rubber Abrasion Test Machine Sole Wear Testing Equipment
- DIN-53516 Shoes DIN Abrasion Tester Rubber Abrasion Resistance Test Machine DIN Wear Testing Equipment
- ASTM D5264 Ink Rub Abrasion Tester Ink Rub Resistance Test Machine Paper Friction Testing Equipment
- JY-1035 Ink Rub Resistance Tester Ink Decolorizing Test Machine Ink Printing Abrasion Test Equipment
- Microcomputer Falling Ball Rebound Testing Machine Polymeric Materials Tester Foam Sponge Rebound Test Equipment
- Drop Ball Rebound Resilience Tester Foam Rebound Testing Machine Sponge Compression Test Equipment
- REAL-TIME IN-LINE SPOT WELD ANALYZER
- F2 Platform Ultrasonic Quality Inspection Platform
- F1 Platform Ultrasonic Quality Inspection Platform
- Most Popular Gas Leak Detector Tester Vacuum Sealing Testing Equipment Air Leakage Test Machine
Popular Searches
Recommended Products
- IEC 61032 Test Probe 2 with 12.5mm Test Sphere
- IEC 60529 IP4X Test Probe with 1.0mm Test Wire
- IEC 61032 Test Probe C with 2.5mm Rod
- IEC 60529 Jointed Finger Probe for IP2X Testing
- IEC 61032 Test Probe A with 50mm Steel Sphere and Nylon Handle
- IEC 62368-1 Figure 49 Aluminium Foil with J type thermocouple
- IEC62368-1 Figure 48 Aluminium Ring with K type thermocouple
- IEC 62368-1 Figure 47 Steel Disc for temperature rise test
- ISO20957-1 Figure 1 Test Finger Φ9.5mm
- Eliwell refrigeration thermostat ID 985 S/E/CK freezer controller ID 985LX
- Eliwell refrigeration thermostat ID PLUS 961 freezer controller
- Eliwell refrigeration thermostat EW PLUS 961 freezer controller EQ17DI0XB4780
Find Similar Products By Category
- Measurement & Analysis Instruments > Testing Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Tracy Tang
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-