Plastic Chair Injection Molding Machine price (BJ1000V1)

Specifications

Six stages material injection speeds, three stages pressure holding speed , two stage material moten speed

Plastic Chair Injection Molding Machine

 

Plastic Chair Injection Molding Machine

 

1. Clamping Unit

• Finite element analysis on structure, the mould board is more logical, stronger and higher fatigue resistance.

• Low pressure protection function greatly prolongs the service life of the mould.

• High precision electron meter is used to control position, the control precision is 0.1 mm.

• Mechanical, electric and hydraulic (optional) safety protection are equipped

 

 

2. Injection Unit  

• Superior and efficient separating screw and high mixing screw increase the range of material used, and guarantee molten material to be uniform and stable.  

• Machine above BJ400 adopts double injection shift devices to prevent injection nozzle displacement and avoid material leakage.

 

 

 

 

3. Hydraulic System

• High efficient proportional variable pump saves electricity by 25% - 50%.

• With full flow filtration oil circuit of high precision return oil filter, the oil filter effect is up to NAS - 7 levels. 

• Spiral flow cooler is high in heat transfer efficiency and less pressure loss.

 

 

4. Controller

•  It can store injection material information for 120 setsof moulds 

•  Fuzzy temperature control is use. High and low temperature deviation alarm and thermocouple disconnection inspection functions are available. 

•   Function to prevent cold material start-up. 

•   Times of forming can be matched with automatic stop function for convenient production management.  

•   Computer controlled automatic lubrication devices. 

•   Automatic mould adjustion function.

  

 

 

5. Lubrication System

• Major friction parts are equipped with lubrication points. Central oil supply system is used for hinges.

• Intelligent volumetric centralized lubricating system is equiped.

 

6. Major components

 

 

7. Parameter 

Description	Unit	BJ1000V1
Clamping Unit
Clamping Force	KN	10000
Opening Stroke	mm	1150
Max daylight:	mm	2300
Platen size	mm	1700x1700
Space between Bars(H*V)	mm*mm	1160x1160
Max. Mold Height	mm	1150
Min. Mold Height	mm	500
Ejector Stoke	mm	350
Ejector Force	KN	290
Injection Unit
Screw Diameter	mm	100   110    120
Screw L/D Ratio		23      21    19
Injection Pressure	Mpa	205   169   142
Shot Volume	cm3	4084 4942 5881
Shot Weight(PS)	g	3838 4644 5527
Shot weight(PS)	QZ	135   164   195
Injection Rate	g/sec	686    830   988
Plasticizing capacity	g/sec	85     106    121
Screw Stroke	mm	245
Screw Speed	rpm	115
Power Unit
Hydraulic System Pressure	Mpa	17.5
Pump Motor Power	KW	55+37
Heater Power	KW	42
General
Dry-cycle time	sec	-
Oil Tank Capacity	L	1600
Machine Weight	Ton	50
Machine Dimensions(L*W*H)	m*m*m	11X2.9X3.1