Molded and extrusion air rubber hose,elbow hose

The rubber hose connecting air-inlet and air-valve

1. Material: NR, EPDM and etc.
2. Hardness: 60A-80A.
3. Temperature: -60°c- +180°c.
4. Size: according to your request.
5. Package: 43X34X24cm standard export cartons with plastic bags inside.
6. Payment terms: L/C, T/T.
7. Produce flow: Confirm samples first, then start mass production.
8. Delivery time: Within 20 days,as per the quantity.
9. Advantages: oil-resistant, aging-resistant, high/low temperature-resistant, wearable and etc

10. Note: Our factory can design and produce goods according to your detailed drawings or samples.

11. Close attention to the internal cross sectional profile and area, air velocity and flow path through each and every point along the entire length of the snorkel system ensures that the greatest air flow is achieved.

12. This of course applies to components that are not visible. For example in order to achieve the optimum air flow and to take full advantage of the tight inner guard area, a special thick-walled rubber hose was engineered to closely couple the snorkel body to the air intake assembly. This specialized hose is specifically constructed for positive sealing at each end and is exceptionally stable to eliminate any possibility of restriction through collapse when under suction - and super tough to withstand high levels of under-hood vibration as experienced on rough corrugated outback tracks.    

13.