RC CellMeter8 2-8S-Battery Capacity Voltage Checker Meter LiPo-Li-lon-NiMH For 8S LIHV Battery

 Instructions

Cell Meter 8 is a very clever device that can show you the condition of your battery packs

It can be used with the most common battery types used for RC Modeling

LiLon  (Lithium Lon)

LiPO (Lithium Polymer)

LiFe(Lithium Ferrite)

NICD,NIMH, LIHV

Support: 2-8S,  Test 1s Lithium Battery, You need to access more than 3S of Nickel Batteries, or 5V UBEC to Nicd ,NIMH Port for Cell Meter 8 to provide working power

Nicker Battery typed NICD or Nimh, without need for addtional power supply of cell meter8 can support 4-8s, such as the need to test less than 4S of Nickel Batteries,you can need to access 2-8s Lithium Battery to the Lithium port for the cell meter 8 to provide working power

Features:

Product Name: CellMeter 8 multifunction tester

AOK's new battery tester, balance, simple discharge work, and a steering gear tester tester

Can measure Li-Po, Li-lon, Li-Fe, NiCd, NiMH,LIHV ,

Battery voltage, detection accuracy of 0.001V

Test 2-8s lithium battery (many Hodge can only test 7S lithium battery)

 Parameters Setting;

CellMeter8 connect the Lithium Battery or Nickel Batter in the working state,Press Menu  setup botton, Enter Parameter setting mode, Parameters setting mode, short press menu setup button is to enter the next parameter setting model,  short press Cell Key to reduce the parameters Short press Mode key to increase the parameter, Discharge and voltage parameter setting state, Long Press Cell Button to quickly reduce ,Long press Mode buttom for the rapid increase

Lithium Battery Detection Mode

NICD,NIMH, Battery Detection Mode

Lithium Battery Balance Discharge ,Fast discharge,  fast discharge module need to be selected independently  50w or 150W

Fast Discharger

Servo.ESC Test Mode

ESC Test Mode

Functional Interface display