nc servo feeder equipment

Features

1.Suit for thick materials.

2.You can input 20 groups different length of feeding,every group provides 999 stamping times.

3.The humanized mannual model:you can input 3 suitable segment hand-drive speed. Easy to operate and make the material go into the mould  accurately .

4.Effective releasing device:you can setup the releasing angle quickly through matching cam signal of the punch machine and the adjustment of the matetial .

5.The set of the material length:you can input the length you need on the control pannel.

6.Feeding structure : The hollow rolls are light,the gyration inertia is small.      

7.The prodects can be customized.

Parameters

Max. feeding width: 200 mm;

Max. feeding length: 9999.99 mm;

Thikness of the material: 0.1-3.5 mm;

Feeding speed: 20m/min;

Releasing method: Pneumatic releasing;

Servo motor: 1.5 kw.