Continuously operating 24 hours sawdust dryer machine withCE for sale

Continuously operating 24 hours sawdust dryer machine 

Sawdust dryer machine introduction

Rotary dryer is widely used in the field of building materials, metallurgies, chemical industry, cement and so on. Sawdust dryer machine can also dry slag, coal powder, mining powder, clay, sand, limestone and so on. It consists of rotary body, lifting blade, driving device, supporting device etc. The sawdust dryer machine has advantages of reasonable structure, high efficiency, low energy consumption and convenient for transportation.

 Sawdust dryer machine technical data 

Sawdust dryer machine working principle

1.The wet sawdust enter into hopper by the belt conveyor through feed pipe into the cylinder of sawdust dryer machine.

2.The wet sawdust flow smoothly into the sawdust dryer machine cylinder because of the gradient and guiding plate.

3.Under the high temperature from the heating stove and the effect of the steering plate and the rotation of the cylinder, the wet sawdust can be dried well in the cylinder of the sawdust dryer machine.

4.After the drying process, the dried sawdust come out from discharge port of the sawdust dryer machine.

5.The cyclone catches a slight of oddments,and the induced draft fan makes the sawdust cool and discharges the hot air.

The working principle is just as the following flow chart shows:

Sawdust dryer machine structure as belows

1. What the sawdust dryer machine can also be used for ?

This sawdust dryer machine can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. They are widely used in building materials, metallurgy, and chemical industry.

2.What heating source can be adopted for sawdust dryer machine ?

Coal, oil, gas(LPG, LNG), wood pellets etc. You can build a stove by yourself, or choose machines necessary to the corresponding fuel.

3.What’s the steel material of your KEY PARTS of sawdust dryer machine?

Motor from Xinxiang National Standard; Reducer from Zibo, Shandong; Bearings from ZWZ, Details of rotary dryer including the structure and material, we will send to you after the quotation.

4.How many workers of sawdust dryer machine?

Usually 2-3 workers, exact number depends on the specific condition.

5.What can do preparation for sawdust dryer machine?

You need build the stove sometimes, fundation necessary. The fundation figure will be offered after order. Don’t worry, we will inform you in time after order.

6.How about the after-sales service of sawdust dryer machine?

a.Installation

Usually we offer the detailed Product Operating Instructions for customer, they can install and operate by themself. Also our factory could send the engineer to guide the installation of equipment and the commissioning of the machine.

b.Training

Training is FREE to every customer.

c.2 years warranty

we provide 2-years warranty to make sure your machine runs consistently, except the wearing parts.

d. Spare parts in stock, and only charge manufacture fees for old customer.

We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.