Settling Dust Chamber Environmental Simulation Chamber

                                        Settling Dust Chamber  Environmental Simulation Chamber

    This product is applicable for the dust proof and resistant test of various auto components and parts including lamps, meters, electric dust proof sheath, steering system and lock etc.

Main Technical Parameter

Note: Chamber size can be customized according to customer request.

We have experience of producing and installing walk in dust chamber.

Test area and shelf

Test area is made from stainless-steel.

Standard load of shelf is 50kg (If need greater load, confirm in advance).

Chamber inside equipped with power interface for test specimen.

Normal wire diameter is 50 um.

Normal width of a gap between wires is 75um.

you can put test specimen on a stainless steel shelf, which is fixed above the sieve and funnel,

Control Panel

The controller is located on the right side of the test area.

Which is 5.7" programmable color touch display controller;                           

99 programs 99 sections;

R-232 interface;

PC Link with software

Vacuum system

There is a vacuum for some test specimens.

Bottom of dust chamber is fitted with vacuum pump, a pressure gauge,

air filter, pressure regulator, connecting tube.

The vacuum system connect the pump, and the other side connected test specimen.

Dust circulation

First, dust is blown in test area by air motor,

Sencong, fall in funnel, and re-cycle blowing pump to achieve dust circulation test.

Bottom of chamber is fitted with circulating pump, vacuum pump, motor.

Safety protection

Independent over-temperature protection,

Over-current protection

Earth leakage protection

Motor overheating protection

Phase-lack protection

 It can be used for Sea, Air,Railway, Truck transportation.

Xi'an LIB Enviroment Simulation Industry

Add: No.5 Zhangba First St, Xi'an High-Teach Area, Shaanxi Provinces  P.R. China 710065

Tel: +86 (0)29 68918976

Fax: +86 (0)29 68918977

Skype: lib_melody