Glass Vial Washing Machine for Parenterals

Specifications

Glass Vial Washing Machine for Parenterals
Sterile Ampoule Washing Machine
Automatic Ampoule & Vial Washing Machine Manufactu

Glass Vial Washing Machine for Parenterals

Glass Vial Washing Machine for Parenterals  is specially designed to wash Ampoule & Vial with minimum contact of machine parts with container. Machine with specially designed Gripper system holds the container from Neck and invert till the washing operation completed and again after washing release the container on outfeed feedworm system in vertical position ensures positive wash of containers. Machine is suitable to wash various sizes of containers with the help of change parts. Automatic Rotary Ampoule & Vial Washing Machine is widely uses in Pharmaceutical, Veterinary & Biotech industry for performance & cGMP demanding customers.
 
 
Salient Features:-
 
 
    All contact parts with the internal surface of Ampoules/Vials and the wash media are made of AISI SS 316L Stainless Steel
 
    Other parts are made from engineering plastic, FDA approved or AISI SS 304 Stainless Steel
 
    All finishes, welding joints are processed, treated & equipment selected in accordance with cGMP standards
 
    18 Jets for 6 Internal washing zones
 
    15 Cassette of Grippers each having 2 Grippers
 
    Suitable for 1ml to 25ml Vials & 2ml to 100ml vials
 
    Washing sequence can be made as per customer’s requirements
 
    3 Pumps and 3 Tanks of 25 liters each
 
    Each washing zone with independent circuit to avoid contamination
 
    Automatic Infeed and Exit of Ampoules/Vials
 
    Output capacity of up to 240 Ampoules/Vials per Minute

Process Operation:-
 
 
Ampoules/Vials feed from the Infeed tray are received on an Infeed Feedworm then moves on Infeed starwheel. The Grippers picks up the Ampoule/Vial from Infeed Star Wheel and invert it in neck down position over washing needles and move along with the needle bar for Washing. On completion of a cycle, washed ampoules/vials are again inverted to neck upward position and feed to output star wheel. Washed ampoules/vials received from output starwheel can be collected on Output Tray or can be pushed to tunnel

Washing Cycle:-
 
1st wash    Recycled Water (WFI)
 
2nd wash    Compressed Air
 
3rd wash    DM Water
 
4th wash    Compressed Air
 
5th wash    Water for Injection (WFI)
 
6th wash    Compressed Air

Technical Specification:-

Model:	AVRW-120	AVRW-240
Production Rate:	70 to 120 Containers/Minute	90 to 240 Containers/Minute
Input Specification:	-	-
Vial Diameter	9mm to 21.5mm	9mm to 21.5mm
Vial Height	60mm to 140mm	60mm to 140mm
Vial Diameter	14mm to 56mm	14mm to 56mm
Vial Height	32mm to 110mm	32mm to 110mm
Power Specification:	4 H.P., 3 Phase 50 Hertz, 4 wire system	4 H.P., 3 Phase 50 Hertz, 4 wire system
Optional Accessories:	Programmable Logic Control (System) with MMI Aluminum Profile Cabinet covering full machine	Programmable Logic Control (System) with MMI Aluminum Profile Cabinet covering full machine
Utility:	Air – 20 CFM Water – 200 to 500 liter per hour depend upon container size	Air – 20 CFM Water – 200 to 500 liter per hour depend upon container size
Water Tank & Pump:	3 nos. each with 25 Liters Capacity & Centrifugal pump	3 nos. each with 25 Liters Capacity & Centrifugal pump
Overall Dimension:	2050mm (L) X 2000mm (W) X 1210mm (H)	2450mm (L) X 2000mm (W) X 1300mm (H)