1.2mm E309LT1-1 solder powder

Specifications

E309LT1-1 Stainless welding wire suitable for welding of 22%Cr-12%Ni steel (SUS 309S), 18%Cr-8%Ni clad steel and dissimilar m

1.2mm E309LT1-1 solder powder

E309LT1-1 Stainless welding wire suitable for welding of 22%Cr-12%Ni steel (SUS 309S), 18%Cr-8%Ni clad steel and dissimilar

 

1)AWS E309LT1-1/-4 Stainless steel Welding wire  

 

E309LT1-1 is a kind of stainless steel gas-shielded flux-cored welding wire.

 

 

 

E309LT1-1/4 is suitable for welding of 22%Cr-12%Ni steel (SUS 309S), 18%
Cr-8%Ni clad steel and  such as Cr-Mo steel or mild steel to stainless and
build-up welding of carbon steel. E309LT1-1/4 is a flux corded wire for Flat, H-Fillet, V-up, down
position welding for CO2 or Ar-CO2 (75%Ar-25%CO2) shielding gas. It provides excellent
usability with stable arc, less spattering, good bead appearance. For mechanized welding of HFillet
this wire is an excellent choice, as it meets the requirement of superior wire feeding
properties combined with high deposition efficiency.

2)Shielding Gas: CO2 or Ar+(20~25)%CO2

 Diameter: 1.2-1.6mm 

 3)Standards:

 

        a) AWS E309LT1-1

 

        b) GB E309LT1-1

 

        C) YC-YA309L(Q) 

 

                                                                                                                                                                                                                                                                                                     

 

4)Packing:

 

One spool is vacuum packed by aluminum film and then one carton 

 

5)

 

Chemical composition of deposited metal(%)
C	Mn	Si	S	P	cr	Ni
0.028	1.35	0.75	0.001	0.025	22.04	12.21

 

 

 

6)Mechanical Properties of Deposited Metal:

 

TensileStrength:560MPA,Elongation:38%