Silicone Bending Drum Heater WVO Oil Biodiesel Plastic Metal Barrel Heater with Thermostat,UL,CE,ISO

Specifications

*High thermal efficiency,safe,flexible,pliable
*Temp. -60+250deg.C/-76+482deg.F
*CE&ISO9001
*OEM&ODM
*Wholesale price

Welcome to our Baicheng Company on Silicone Heaters&Wires

Enjoy yourselves here

 

Your first choice-"Chinese BC Heaters"

 

Installation:

 

With 3M 468MP and Spring Clips and Velcro,500mm,1000mm and more longer power cable.

Support for printing your company's logo,model,voltage,wattage,website and etc.

 

We Promise:

 

a) Only Arlon silicone rubber substrate imported from USA in heater production to provice best quality

b) Free assistance in heater design to achive an ideal thermal solution and temperature control system for your application

c) Each heater is newly made to order and factory-inspected befor delivery to you

d) Please contact us for special discount of large quantity purchase

e) If you need different heating solution and thermal management,just tell us about your requirements/applicaitons and let our flexible thermal professionals work for you for an ideal specific solution

  

Facture:

 

~~This silicone pad heater is very versatile and pliable

~~These heaters/warmers for automotive applications as well as many other uses ~~where a powerful,flexible heaters is needed

~~Rated for 1-2 quart systems

~~Designed for small oil pans/crankcase

~~Universal Application

~~Mounts in any position

~~Very flexible and pliable

~~Plugs into any volt acceptable

~~Use as hydraulic tank,fuel tank,fuel filter,oil pan or transmission pan heater

 ~~Keep engine oil warm

~~Prevent cold start damage

~~A much much safer and more reliable heat source than RepRap PCB heatbeds

~~The 10mm hole at heater center is for the convenience of RTD devices such as K type thermocouple,PT100 to monitor heat-sink temperature

 

Special Features of Drum Heater:

 

~ Grounded heating element with maximum operating temperature of -60-250deg.C.

~ Easy adjustable temperature control.

~Ful coverage drum heaters feature an easy-to-use temperature controller with addible alarm.

~Variety of standard sizes and configure-to-order options for special vessel heaters.

~ 1,250 volts dielectric tested.

~ Ratings for metal and plastic drum,barrels and pails.

~UL,CE and ISO approved.

 

Applications:

 

Great for Cars,Tractors,Trucks,4 Wheelers,Atv's,Lawn Mowers and so many uses.

Electric Heater as engine pad heater,engine warmer pad,engine oil pan heater,engine fuel filter heater,engine panel heater,engine anti-condensation Heater,generater heater,aoto engine heater,automobile engine heater,car engine heater,engine heating pad,engine warmer,battery heater pad,medical instrument heater and so on.

 

Advantages:

 

1-Cheap+robust+easy to install,highly compacted they reach a surface watt density of up to 2-3w/cm2 and withstand highest stress

 

2-Apart from our board standad range we also develop and manufacture heaters according to your speacial demands

 

3-When ordering please specify diameter+lenght of the heater+wattage+voltage or drawing of special type configuration.If not,please tell us your requirement,we will design if for you

 

Additional information:

 

~~It is very thin, light and flexible.

~~It can improve heat transfer, accelerate warming and decrease power under the process of operation. Fiberglass outside stabilizes the shape of heaters.

~~Designed according to actual shape and dimension, including three-dimensional geometry to meet the requirement of your equipments and machines 
~~Moistureproof and non-slip to offer its longer working life

~~Simply sticking to your components through sulfuration, adhesive or fixer

~~Freezing protection and anti-pressure, can be used in all kinds of instruments and equipments
~~Applied in the medical equipments such as blood analyzer heater,testing pipe heater and etc
~~The auxiliary equipments of computer such as laser printer, etc
~~Plastic film sulfuration

 

Referenced Specifications:

 

Size	Volt	Watt	Sample Price	Bulk Price
152×279MM	12v	200w	US$11.00	US$10.00

 

Remarks:

 

1)The above heater specification is available

2)Please specify the heater's diameter/length+width,voltage,wattage

3)Please your heater's drawing of special type configuration

4)Please tell us your requirement for applications

 

Silicone Heater Data Sheet:

 

Supply Voltage: 0-400V,1 or 3 phase(please contact us for other voltages).

Insulation Material: Fiberglass reinforced silicone rubber.

Max. Operating Temp. to use: 260deg.C or 500deg.F.

Min. Element Temp. to use: -50deg.C or 500deg.F.

Max. Power Density: 5w/sq. cm depending on application.

Standard Thickness: 1.5mm.

Flammability: Flame Retardant.

Moisture Absorption: Moisture proof.

Thermal Protection&Control: On board thermal fuse,thermostat,thermitor and PT100 are avaible as part of your thermal management solution.

 

Silicone Drum Heater

Fits most 55 gallon drums

For plastic and metal drums

More Surface area means faster heating!

 

Lenghth: 1740mm(68.5'')

Width: 250mm(10'')

Thickness: 1.5mm(.06'')

Thermostat Range:30 to 150deg.C

Voltage: 120v,60Hz

Power: 1500watts

Ideal for heating up WVO for settling or precessing biodiesel.This heater is controlled by an adjustable thermostat.

Flexible springs ar used to attach the silicon heater around various diameter drums.The springs can stretch up to about 3inches.

For plastic drums,it is recommended to keep the thermostat set below 100deg.C.

 

 

Tell us if you need 110V,120V,230V,240V and any other supply voltages.