Multifunctional Leeb Hardness Tester (SHL-360)

Multifunctional Leeb Hardness Tester (SHL-360)

SHL-360 multi-function Leeb hardness tester according to the Leeb hardness measurement principle can be easily and quickly measure a variety of metal materials, and instantly display the value of measured hardness. And it can swiftly convert the hardness value(Brinell HB, Luo s HRC, Vickers HV, Shaw HS). It can be pre-set tolerance limits, beyond the scope will automatic alarm. Host of the product integrated with high-speed thermal mini-printer, adopted imported high-speed printer core can support on the spot printing. The imported long-term paper to ensure that the data can be stored for long periods. Low-power cost design relies on a stable IC integrated circuits, standard high-capacity, long life, high-speed rechargeable NiMH battery pack. Chinese display, menu structure operation panel, used easy and convenient. The seven profiled impact device does not need calibration, automatic identification, USB interface transfer, mass storage, and with data processing software can be working friendly with PC.

1. Technical parameter:

• Measuring range: (170-960)HLD,(17-68.5)HRC,(19-651)HB,
• Measuring direction: can be working at any angle (360°)
• Test material: Steel and cast steel, alloy tool steel, stainless steel, gray iron, ductile iron, cast aluminum alloy, copper-zinc alloys (brass), copper-tin alloy (bronze), copper, forged steel.
• Hardness scale: HL, HB, HRB/C, HRA, HV, HS
• Display: dot matrix LCD,128×64 dots
• Data memory: 500 groups max.(relative to impact times 32~1)
• Thermal printer, working quietly, can print any number of copies of the test results to meet test site needs.
• Printing paper: width is (57.5±0.5)mm, diameter is 30mm
• Battery pack: 6V NI-MH; Battery charging power: 9V/500mA; Charging time: 2.5-3.5 hours
• Continuous working period: about 150 hours(With backlight off, no printing)
• Communication interface: USB1.1

2.Applicable to materials
Steel and cast steel, alloy tool steel, stainless steel, gray iron, ductile iron, cast aluminum alloy, copper-zinc alloys (brass), copper-tin alloy (bronze), copper, forged steel.

3.Features:
a.Based on the Leeb hardness measurement principle, can detect a variety of metal materials; with software calibration feature.
b.A host can be equipped with seven different impact devices, automatically identify the type of impact device, and after replacement without recalibration.
c.Supporting forged steel (Steel) material. When you use the D / DC type impact device test "Forged" sample can be directly read the HB value without having to manually look-up table.
d.The hardness value can be preset lower and upper limit, automatic alarm when out of range. Convenient used for batch testing.
e.Adopted large-screen 128 × 64 dot matrix LCD display, information-rich and intuitive.
f.Chinese display, menu structure panel, simple and convenient operation. EL backlight display for easy use in dimly lit environments.
g.Can store 500 groups (impact times 32 ~ 1) hardness measurement data, each data consists of a single measured value, the average data, testing date, impact direction, the number of materials, hardness system information.
h.Thermal printer integrated with the instrument as a whole, working quietly, fast printing speed can be printed inspection report on site.
i.Built-in nickel-metal hydride rechargeable batteries and charge control circuit; not less than 150 hours of continuous work; Has the power saving, automatic sleep, automatic and shutdown function.
j. Remaining power of the battery can show on the LCD screen, real-time display of remaining power; With charging process indicating function, the operator can keep abreast of the charge level.
k.Can quickly and easily connected with the PC for data exchange through USB interface.Can equipped with computer software, with transmission measurements, the measured value storage management, statistical analysis of measured values, print the measured value report and batch set instrument parameters etc function. So it can meet more higher requirements for quality and management.
Compact design, portable integrated thermal printer can be printed on the spot, Dimension: 212mm × 80mm × 32mm

                               Shaped impact device

4. Configuration

5. Boot display and brief description

After boot Will automatically enter into the main display interface, as shown below:

6. USB data-processing software:
·Storage: store the measuring data.
·Transferred out: bring up the data from the host
·Print: print data output, A4 interface
·Overrun: Show overrun data after setting tolerance limits
·Clear: Clear the measurement data
·Connection: set host connection
·Disconnect: set host disconnect
·Download: download data to local, mass storage
·Setting: Parameter settings
·Help: instant help function

Shaped impact device technical parameters and introduce table: