Optical plate, optical breadboard, flat plating, flat plate

Optical Tables with Rigid Non-Isolating Supports

The optical top of model 02PT series are  a cost-effective choice for general-purpose applications, and are ideally suited for less demanding general photonics applications but would not be recommended for highly sensitive interferometic applications. The need to be reminded that, the tops of 02PT and 03PT series are the same.

For many applications, they do not warrant vibration isolation. In such cases, it is only necessary to have a non-isolating support structure, which is strong enough to support an optical top under heavy load. The non-isolating supports are designed to support optical tables with tie bars for more stable. Each non-isolating support has an adjustment screw to level or provide 15mm of table height adjustment using a post.

The set of four non-isolating supports have a total load capacity of 2500kg. The height of table surface requires a standard height of 800mm. So the heights of non-isolating supports are different because of the different thickness of top tables. Special heights are available upon request.

Specifications:

1. Optical Tops

*Construction: Double-plated, honeycomb core sandwiched structure

*Core: Plated steel honeycomb

*Top Plate: 5mm or 8mm thickness, magnetic stainless steel plate, brush finished

*Side Walls: Carbon steel plate with damped wood composite, vinyl covered finish

*Bottom Plate: 5mm thickness, carbon steel plate epoxy painted finish

*Surface Flatness: 0.2-0.5mm/m² area

*Surface Coarseness: 0.8μm-1.6μm

*Swing: <5μm

*Mounting Hole Pattern: Metric M6x1.0 threaded hole on 25mm or 50mm centers

*Damping: Standard broadband damping

2. Rigid Non-Isolating Systems

*Max Loading (set of four): 2500kg

*Weight: 96kg(set of four), 126kg(set of six)

*Finish: Black Paint