Contact Platform Support
Help CenterAll-in-one Ball Mill Grinding System for New Mining Construction Project
Product Spotlights
2.Low maintenance cost
3.Low over-grinding rate
4.Full line intelligent monitoring
5.High material utilization
6.Customized grinding fineness
7.Industrial large-scale production support
Related Products
-
Heavy‑Duty Overflow Ball Mill for Primary & Secondary Ore Grinding OperationNegotiableMOQ: 1 Combo -
Small Scale Batch Wet Ball Mill for Ore Test and Mineral Pilot PlantNegotiableMOQ: 1 Combo
-
Energy‑Saving Grate Discharge Ball Mill for Hard Rock Ore BeneficiationNegotiableMOQ: 1 Combo
-
High Output Horizontal Ball Mill for Gold Copper Ore Concentrator PlantNegotiableMOQ: 1 Combo
-
Wet Type Ball Mill for Gold Ore Tailings Re‑grinding & Recovery SystemNegotiableMOQ: 1 Combo
1. Product Description
The All-in-one Ball Mill Grinding System for New Mining Construction Project is a highly integrated, fully equipped modular grinding solution specially designed for newly built mineral processing plants. Different from traditional scattered equipment matching, this all-in-one system integrates all core and auxiliary equipment required for the complete grinding process, realizing plug-and-play installation and one-stop project construction. It is widely applicable for new mining projects of iron ore, copper ore, gold ore, manganese ore, tin ore and various polymetallic minerals. The integrated system covers automatic feeding unit, heavy-duty ball mill host, hydrocyclone closed-circuit classification system, intelligent PLC control system, environmental protection dust removal device and complete supporting pipelines and electrical systems. Customizable according to project capacity, ore characteristics and site layout, it greatly simplifies the construction process of new mines and serves as the optimal integrated grinding solution for modern standardized mining construction projects.
2. Working Principle
The all-in-one ball mill grinding system adopts mature and reliable closed-circuit circulating wet grinding principle suitable for new mine standardized construction. After overall system debugging and linkage setting, raw ores are quantitatively and continuously transported into the ball mill cylinder through the integrated automatic feeding system. Driven by an energy-saving and low-loss integrated transmission system, the mill cylinder runs stably at an optimized preset speed matching the new project’s process parameters. Scientifically graded high-strength steel grinding media inside the cylinder generate continuous impact crushing, extrusion refinement and friction fine grinding force under centrifugal force and wear-resistant lining friction. Bulk ores achieve thorough monomer dissociation and progressive particle refinement through uninterrupted circulating grinding. Qualified fine pulp is stably delivered to downstream beneficiation equipment, while unqualified coarse particles are automatically screened and returned for re-grinding via the integrated classification unit. The whole integrated system realizes fully linked, automatic, stable and high-efficiency grinding operation, meeting the long-term standardized production demands of new mining projects.
3. Core Features
1. Highly integrated all-in-one design, integrating the entire grinding process equipment to simplify new mine construction.
2. One-stop complete configuration, no need for separate equipment procurement and complicated matching work.
3. Modular assembly structure, fast installation and commissioning, greatly shortening project construction cycle.
4. Wide mineral adaptability, suitable for grinding and dissociation of various new polymetallic mining projects.
5. Precisely optimized system parameters, stable grinding fineness and consistent beneficiation indicators.
6. Integrated intelligent control, realizing automatic linkage operation and reducing labor costs.
7. Standardized new mine construction adaptation, complying with modern green and intelligent mining standards.
4.Technical Specification
| Model | Cylinder RPM (r/min) | Ball Load (t) | Feeding Size (mm) | Discharging Size (mm) | Capacity (t/h) | Motor Model | Power (kW) | Weight (t) |
| MQG600*1800 | 45.5 | 0.5 | ≤ 10 | 0.074-0.5 | 0.2-0.5 | Y160M-6 | 7.5 | 2.5 |
| MQG900*1800 | 38 | 1.8 | ≤ 20 | 0.074-0.6 | 0.8-2 | Y180L-6 | 15 | 5.8 |
| MQG900*3000 | 37.4 | 2.7 | ≤ 20 | 0.074-0.3 | 0.8-3 | Y200L2-6 | 22 | 7.5 |
| MQG1200*2400 | 32 | 4.8 | ≤ 25 | 0.074-0.6 | 1.5-4 | Y225M-6 | 30 | 9.8 |
| MQG1200*4500 | 30 | 5.2 | ≤ 25 | 0.074-0.6 | 1.5-6 | Y280S-6 | 45 | 13.2 |
| MQG1300*4000 | 36 | 5.8 | ≤ 25 | 0.074-0.6 | 2-6 | Y280S-8 | 45 | 14.8 |
| MQG1500*3500 | 28.8 | 8.3 | ≤ 25 | 0.074-0.6 | 3-6 | YR280M-8 | 90 | 17.6 |
| MQG1500*4500 | 28.8 | 10 | ≤ 25 | 0.074-0.4 | 4-8 | JR125-8 | 95 | 22.3 |
| MQG1500*5700 | 28.8 | 12 | ≤ 25 | 0.074-0.4 | 5-10 | JR126-8 | 110 | 26.7 |
| MQG1500*6400 | 28.8 | 13 | ≤ 25 | 0.074-0.4 | 8-12 | JR127-8 | 130 | 29.2 |
| MQG1830*3600 | 24.5 | 12 | ≤ 25 | 0.074-0.4 | 5-10 | JR127-8 | 130 | 31.4 |
| MQG1830*5400 | 24.5 | 15 | ≤ 25 | 0.074-0.4 | 5-20 | JR137-8 | 210 | 33.6 |
| MQG1830*6400 | 24.5 | 19 | ≤ 25 | 0.074-0.4 | 6-25 | JR137-8 | 210 | 36.5 |
| MQG1830*7000 | 24.5 | 20 | ≤ 25 | 0.074-0.4 | 8-30 | JR138-8 | 245 | 39.6 |
| MQG2100*3600 | 24.1 | 21 | ≤ 25 | 0.074-0.6 | 8-20 | YR355L1-8 | 210 | 43.2 |
| MQG2100*4500 | 24.57 | 26 | ≤ 25 | 0.074-0.6 | 8-35 | JR138-8 | 280 | 53.6 |
| MQG2200*3600 | 21.8 | 22 | ≤ 25 | 0.074-0.6 | 9-25 | JR138-8 | 245 | 47.8 |
| MQG2200*4500 | 21.4 | 27 | ≤ 25 | 0.074-0.6 | 10-30 | JR138-8 | 280 | 54.7 |
| MQG2200*7500 | 21.8 | 35 | ≤ 25 | 0.074-0.6 | 10-40 | JR158-8 | 380 | 68.4 |
| MQG2200*9000 | 21.4 | 36 | ≤ 25 | 0.074-0.6 | 10-45 | JR1510-8 | 475 | 76.5 |
| MQG2400*3600 | 21.26 | 26 | ≤ 25 | 0.074-0.6 | 10-40 | JR138-8 | 280 | 63.8 |
| MQG2400*7000 | 21.8 | 36 | ≤ 25 | 0.074-0.6 | 10-45 | JR1510-8 | 475 | 82.4 |
| MQG2400*8000 | 21.8 | 42 | ≤ 25 | 0.074-0.6 | 13-50 | JR630-8 | 560 | 85.7 |
| MQG2400*10000 | 21 | 65 | ≤ 25 | 0.074-0.6 | 15-60 | YR560-8 | 710 | 88.6 |
| MQG2600*8000 | 19.6 | 52 | ≤ 25 | 0.074-0.6 | 16-70 | JR1512-8 | 630 | 97.8 |
| MQG2700*3600 | 21.4 | 39 | ≤ 25 | 0.074-0.4 | 13-75 | JR158-8 | 380 | 86.8 |
| MQG2700*4500 | 21.4 | 43 | ≤ 25 | 0.074-0.4 | 13-90 | JR1510-8 | 475 | 91.8 |
| MQG3000*5400 | 19 | 58 | ≤ 25 | 0.074-0.6 | - | TDMK-30 | 630 | 119.7 |
| MQG3000*9000 | 18.3 | 78 | ≤ 25 | 0.074-0.4 | 20-90 | YR1000-8/1180 | 1000 | 152.4 |
| MQG3000*11000 | 18 | 100 | ≤ 25 | 0.074-0.6 | 30-90 | YR6306-8 | 1120 | 166.7 |
| MQG3200*3600 | 18.6 | 56.5 | ≤ 25 | 0.074-0.6 | 20-80 | YR6302-8 | 630 | 127.4 |
| MQG3200*4500 | 18.6 | 65 | ≤ 25 | 0.074-0.6 | 20-90 | YR6302-8 | 800 | 138.6 |
| MQG3200*5400 | 18 | 72 | ≤ 25 | 0.074-0.6 | 30-100 | YR1000-8 | 1000 | 146.7 |
| MQG3200*9000 | 18 | 85 | ≤ 25 | 0.074-0.6 | 30-100 | YR6302-8 | 1250 | 168.6 |
| MQG3600*4500 | 18 | 86 | ≤ 25 | 0.074-0.6 | 30-100 | YR6302-8 | 1250 | 158.7 |
| MQG3600*6000 | 18 | 117 | ≤ 25 | 0.074-0.6 | 45-180 | - | 14000 | 195.6 |
| MQG4000*6000 | 16.9 | 145 | ≤ 25 | 0.074-0.6 | 60-230 | - | 1800 | 221.7 |
| MQG4500*6000 | 15.6 | 180 | ≤ 25 | 0.074-0.6 | 80-300 | - | 2300 | 269.6 |
Send Inquiry to This Supplier
You May Also Like
-
Dry Ball Mill for Hematite Ore Powder Preparation and Mineral SeparatingNegotiableMOQ: 1 Combo
-
Complete Ball Mill Unit With Feeder Classifier for Ore Grinding CircuitNegotiableMOQ: 1 Combo
-
Industrial Ball Mill for Silver Lead Zinc Ore Processing Beneficiation PlantNegotiableMOQ: 1 Combo
-
Low Noise Stable Running Ball Mill for Medium‑size Mineral Mining PlantNegotiableMOQ: 1 Combo
-
Mine‑Use Ball Mill for Sulfide & Oxide Ore Grinding Beneficiation WorkNegotiableMOQ: 1 Combo
-
Customized Capacity Ball Mill Machine for Different Ore Processing DemandNegotiableMOQ: 1 Combo
-
Ball Mill for Antimony Ore Grinding Plant Antimony Beneficiation EquipmentNegotiableMOQ: 1 Combo
-
Heavy Load Ball Mill Gearbox Assembly for Mining Ore Grinding EquipmentNegotiableMOQ: 1 Combo
-
Mine Ball Mill for Rock Gold Ore Milling Before CIL CIP Leaching ProcessNegotiableMOQ: 1 Combo
-
Cost‑effective Complete Ball Mill Grinding Circuit for Small Mining ProjectNegotiableMOQ: 1 Combo
