Contact Platform Support
Help CenterSmall Scale Batch Wet Ball Mill for Ore Test and Mineral Pilot Plant
Product Spotlights
2.Low maintenance cost
3.Low over-grinding rate
4.Full line intelligent monitoring
5.High material utilization
6.Customized grinding fineness
7.Industrial large-scale production support
Related Products
-
Energy‑Saving Grate Discharge Ball Mill for Hard Rock Ore BeneficiationNegotiableMOQ: 1 Combo -
High Output Horizontal Ball Mill for Gold Copper Ore Concentrator PlantNegotiableMOQ: 1 Combo
-
Wet Type Ball Mill for Gold Ore Tailings Re‑grinding & Recovery SystemNegotiableMOQ: 1 Combo
-
Dry Ball Mill for Hematite Ore Powder Preparation and Mineral SeparatingNegotiableMOQ: 1 Combo
-
Complete Ball Mill Unit With Feeder Classifier for Ore Grinding CircuitNegotiableMOQ: 1 Combo
1. Product Description
The Small Scale Batch Wet Ball Mill is a laboratory and pilot-scale grinding equipment specially developed for ore mineral analysis, beneficiation parameter testing and mineral pilot plant experiments. Different from large-scale continuous industrial ball mills, this batch-type wet grinding machine supports intermittent feeding, fixed-time grinding and manual discharging, fully meeting small-batch ore testing, mineral dissociation analysis and process verification demands. It is widely applicable for wet grinding experiments of gold ore, copper ore, iron ore, manganese ore and various non-ferrous and rare minerals. With compact structure, adjustable grinding fineness and intuitive operation data, it provides accurate experimental data and reliable process basis for mineral beneficiation feasibility analysis, formula testing and formal large-scale production line design.
2. Working Principle
This batch wet ball mill adopts classic intermittent circulating wet grinding principle suitable for laboratory test conditions. After manual feeding of ore samples and water according to test proportions, the machine drives the cylinder to rotate at a stable adjustable speed. High-quality steel grinding media inside the cylinder generate continuous impact crushing, extrusion and friction grinding force. Under the action of water medium and mechanical force, ore particles are gradually refined and dissociated to achieve full separation of target minerals and gangue impurities. Users can freely set grinding time and rotating speed according to experimental requirements to control final particle fineness. After batch grinding is completed, the machine stops running for centralized discharging and sampling inspection. The whole batch grinding process is controllable, repeatable and stable, ensuring accurate and comparable mineral test results.
3. Core Features
1. Professional small batch wet grinding design, exclusive for laboratory ore testing and pilot plant research.
2. Flexible time and speed adjustment, supporting diversified grinding fineness test demands.
3. Wide mineral compatibility, suitable for experimental grinding of various metal and non-metal ores.
4. Intuitive and repeatable test process, ensuring accurate and stable experimental data.
5. Compact and portable structure, small floor space, easy installation and convenient operation.
6. Low operation noise and stable running performance, suitable for long-term laboratory daily tests.
7. Reliable pilot test equipment, providing effective data support for formal beneficiation plant design.
4.Technical Specification
| Model | Cylinder RPM (r/min) | Ball Load (t) | Feeding Size (mm) | Discharging Size (mm) | Capacity (t/h) | Motor Model | Power (kW) | Weight (t) |
| MQG600*1800 | 45.5 | 0.5 | ≤ 10 | 0.074-0.5 | 0.2-0.5 | Y160M-6 | 7.5 | 2.5 |
| MQG900*1800 | 38 | 1.8 | ≤ 20 | 0.074-0.6 | 0.8-2 | Y180L-6 | 15 | 5.8 |
| MQG900*3000 | 37.4 | 2.7 | ≤ 20 | 0.074-0.3 | 0.8-3 | Y200L2-6 | 22 | 7.5 |
| MQG1200*2400 | 32 | 4.8 | ≤ 25 | 0.074-0.6 | 1.5-4 | Y225M-6 | 30 | 9.8 |
| MQG1200*4500 | 30 | 5.2 | ≤ 25 | 0.074-0.6 | 1.5-6 | Y280S-6 | 45 | 13.2 |
| MQG1300*4000 | 36 | 5.8 | ≤ 25 | 0.074-0.6 | 2-6 | Y280S-8 | 45 | 14.8 |
| MQG1500*3500 | 28.8 | 8.3 | ≤ 25 | 0.074-0.6 | 3-6 | YR280M-8 | 90 | 17.6 |
| MQG1500*4500 | 28.8 | 10 | ≤ 25 | 0.074-0.4 | 4-8 | JR125-8 | 95 | 22.3 |
| MQG1500*5700 | 28.8 | 12 | ≤ 25 | 0.074-0.4 | 5-10 | JR126-8 | 110 | 26.7 |
| MQG1500*6400 | 28.8 | 13 | ≤ 25 | 0.074-0.4 | 8-12 | JR127-8 | 130 | 29.2 |
| MQG1830*3600 | 24.5 | 12 | ≤ 25 | 0.074-0.4 | 5-10 | JR127-8 | 130 | 31.4 |
| MQG1830*5400 | 24.5 | 15 | ≤ 25 | 0.074-0.4 | 5-20 | JR137-8 | 210 | 33.6 |
| MQG1830*6400 | 24.5 | 19 | ≤ 25 | 0.074-0.4 | 6-25 | JR137-8 | 210 | 36.5 |
| MQG1830*7000 | 24.5 | 20 | ≤ 25 | 0.074-0.4 | 8-30 | JR138-8 | 245 | 39.6 |
| MQG2100*3600 | 24.1 | 21 | ≤ 25 | 0.074-0.6 | 8-20 | YR355L1-8 | 210 | 43.2 |
| MQG2100*4500 | 24.57 | 26 | ≤ 25 | 0.074-0.6 | 8-35 | JR138-8 | 280 | 53.6 |
| MQG2200*3600 | 21.8 | 22 | ≤ 25 | 0.074-0.6 | 9-25 | JR138-8 | 245 | 47.8 |
| MQG2200*4500 | 21.4 | 27 | ≤ 25 | 0.074-0.6 | 10-30 | JR138-8 | 280 | 54.7 |
| MQG2200*7500 | 21.8 | 35 | ≤ 25 | 0.074-0.6 | 10-40 | JR158-8 | 380 | 68.4 |
| MQG2200*9000 | 21.4 | 36 | ≤ 25 | 0.074-0.6 | 10-45 | JR1510-8 | 475 | 76.5 |
| MQG2400*3600 | 21.26 | 26 | ≤ 25 | 0.074-0.6 | 10-40 | JR138-8 | 280 | 63.8 |
| MQG2400*7000 | 21.8 | 36 | ≤ 25 | 0.074-0.6 | 10-45 | JR1510-8 | 475 | 82.4 |
| MQG2400*8000 | 21.8 | 42 | ≤ 25 | 0.074-0.6 | 13-50 | JR630-8 | 560 | 85.7 |
| MQG2400*10000 | 21 | 65 | ≤ 25 | 0.074-0.6 | 15-60 | YR560-8 | 710 | 88.6 |
| MQG2600*8000 | 19.6 | 52 | ≤ 25 | 0.074-0.6 | 16-70 | JR1512-8 | 630 | 97.8 |
| MQG2700*3600 | 21.4 | 39 | ≤ 25 | 0.074-0.4 | 13-75 | JR158-8 | 380 | 86.8 |
| MQG2700*4500 | 21.4 | 43 | ≤ 25 | 0.074-0.4 | 13-90 | JR1510-8 | 475 | 91.8 |
| MQG3000*5400 | 19 | 58 | ≤ 25 | 0.074-0.6 | - | TDMK-30 | 630 | 119.7 |
| MQG3000*9000 | 18.3 | 78 | ≤ 25 | 0.074-0.4 | 20-90 | YR1000-8/1180 | 1000 | 152.4 |
| MQG3000*11000 | 18 | 100 | ≤ 25 | 0.074-0.6 | 30-90 | YR6306-8 | 1120 | 166.7 |
| MQG3200*3600 | 18.6 | 56.5 | ≤ 25 | 0.074-0.6 | 20-80 | YR6302-8 | 630 | 127.4 |
| MQG3200*4500 | 18.6 | 65 | ≤ 25 | 0.074-0.6 | 20-90 | YR6302-8 | 800 | 138.6 |
| MQG3200*5400 | 18 | 72 | ≤ 25 | 0.074-0.6 | 30-100 | YR1000-8 | 1000 | 146.7 |
| MQG3200*9000 | 18 | 85 | ≤ 25 | 0.074-0.6 | 30-100 | YR6302-8 | 1250 | 168.6 |
| MQG3600*4500 | 18 | 86 | ≤ 25 | 0.074-0.6 | 30-100 | YR6302-8 | 1250 | 158.7 |
| MQG3600*6000 | 18 | 117 | ≤ 25 | 0.074-0.6 | 45-180 | - | 14000 | 195.6 |
| MQG4000*6000 | 16.9 | 145 | ≤ 25 | 0.074-0.6 | 60-230 | - | 1800 | 221.7 |
| MQG4500*6000 | 15.6 | 180 | ≤ 25 | 0.074-0.6 | 80-300 | - | 2300 | 269.6 |
Send Inquiry to This Supplier
You May Also Like
-
Industrial Ball Mill for Silver Lead Zinc Ore Processing Beneficiation PlantNegotiableMOQ: 1 Combo
-
Low Noise Stable Running Ball Mill for Medium‑size Mineral Mining PlantNegotiableMOQ: 1 Combo
-
Mine‑Use Ball Mill for Sulfide & Oxide Ore Grinding Beneficiation WorkNegotiableMOQ: 1 Combo
-
Customized Capacity Ball Mill Machine for Different Ore Processing DemandNegotiableMOQ: 1 Combo
-
Ball Mill for Antimony Ore Grinding Plant Antimony Beneficiation EquipmentNegotiableMOQ: 1 Combo
-
Heavy Load Ball Mill Gearbox Assembly for Mining Ore Grinding EquipmentNegotiableMOQ: 1 Combo
-
Mine Ball Mill for Rock Gold Ore Milling Before CIL CIP Leaching ProcessNegotiableMOQ: 1 Combo
-
Cost‑effective Complete Ball Mill Grinding Circuit for Small Mining ProjectNegotiableMOQ: 1 Combo
-
Continuous Overflow Wet Ball Mill for Copper‑Iron Mixed Ore GrindingNegotiableMOQ: 1 Combo
-
Grate Type Ball Mill for Coarse Grinding of Manganese Tin Tungsten OreNegotiableMOQ: 1 Combo
