Contact Platform Support
Help CenterWet Type Ball Mill for Gold Ore Tailings Re‑grinding & Recovery System
Product Spotlights
2.Low maintenance cost
3.Low over-grinding rate
4.Full line intelligent monitoring
5.High material utilization
6.Customized grinding fineness
7.Industrial large-scale production support
Related Products
-
Dry Ball Mill for Hematite Ore Powder Preparation and Mineral SeparatingNegotiableMOQ: 1 Combo -
Complete Ball Mill Unit With Feeder Classifier for Ore Grinding CircuitNegotiableMOQ: 1 Combo
-
Industrial Ball Mill for Silver Lead Zinc Ore Processing Beneficiation PlantNegotiableMOQ: 1 Combo
-
Low Noise Stable Running Ball Mill for Medium‑size Mineral Mining PlantNegotiableMOQ: 1 Combo
-
Mine‑Use Ball Mill for Sulfide & Oxide Ore Grinding Beneficiation WorkNegotiableMOQ: 1 Combo
1. Product Description
The Wet Type Ball Mill for Gold Ore Tailings Re-grinding & Recovery System is a professional fine grinding equipment specially designed for secondary utilization and resource recovery of gold mine tailings. Different from traditional primary grinding ball mills, this wet ball mill is optimized for fine particle re-grinding, fully dissociated residual fine gold, wrapped gold and unprocessed gangue minerals in tailings. It supports matched tailings recovery production lines, tailings environmental treatment and secondary gold enrichment projects. With precise fineness control, anti-abrasion structure and low-speed stable grinding performance, it effectively solves the problems of low recovery rate and resource waste caused by coarse tailings discharge. It can form a complete closed-circuit re-grinding and recovery system with classifiers and flotation equipment, realizing maximum resource utilization and economic benefit improvement for gold ore processing plants.
2. Working Principle
This professional wet ball mill adopts refined circulating wet grinding principle suitable for gold tailings secondary processing. Gold tailings materials are evenly and continuously transported into the mill cylinder through the feeding system. Driven by a stable energy-saving transmission system, the cylinder runs at optimized low-speed fine grinding parameters to avoid over-grinding. Scientifically proportioned ultra-fine steel grinding media produce gentle and uniform impact, extrusion and friction force aiming at fine tailings particles. The wrapped gold and dissociated gold remaining in the tailings are fully released through repeated precise re-grinding. Qualified fine pulp with liberated gold minerals is stably discharged and delivered to downstream separation and recovery procedures. Unqualified coarse tailings particles are screened by the classification unit and returned to the ball mill for cyclic secondary re-grinding. The whole closed-loop system realizes efficient, refined and low-loss recovery grinding of gold tailings resources.
3. Core Features
1. Specialized for gold tailings re-grinding, effectively releasing wrapped residual gold and improving gold recovery rate.
2. Precise fine grinding control, avoiding over-grinding and ensuring stable tailings secondary beneficiation indicators.
3. Optimized low-speed stable operation design, reducing equipment wear and lowering reprocessing energy consumption.
4. Perfectly compatible with tailings recovery and flotation systems, forming complete secondary utilization production lines.
5. High resource utilization rate, turning waste tailings into recyclable valuable mineral resources.
6. Eco-friendly grinding mode, assisting gold mines in tailings environmental treatment and green production.
7. Stable long-term operation performance, reducing secondary processing cost and improving overall project profit.
4.Technical Specification
| Model | Cylinder RPM (r/min) | Ball Load (t) | Feeding Size (mm) | Discharging Size (mm) | Capacity (t/h) | Motor Model | Power (kW) | Weight (t) |
| MQG600*1800 | 45.5 | 0.5 | ≤ 10 | 0.074-0.5 | 0.2-0.5 | Y160M-6 | 7.5 | 2.5 |
| MQG900*1800 | 38 | 1.8 | ≤ 20 | 0.074-0.6 | 0.8-2 | Y180L-6 | 15 | 5.8 |
| MQG900*3000 | 37.4 | 2.7 | ≤ 20 | 0.074-0.3 | 0.8-3 | Y200L2-6 | 22 | 7.5 |
| MQG1200*2400 | 32 | 4.8 | ≤ 25 | 0.074-0.6 | 1.5-4 | Y225M-6 | 30 | 9.8 |
| MQG1200*4500 | 30 | 5.2 | ≤ 25 | 0.074-0.6 | 1.5-6 | Y280S-6 | 45 | 13.2 |
| MQG1300*4000 | 36 | 5.8 | ≤ 25 | 0.074-0.6 | 2-6 | Y280S-8 | 45 | 14.8 |
| MQG1500*3500 | 28.8 | 8.3 | ≤ 25 | 0.074-0.6 | 3-6 | YR280M-8 | 90 | 17.6 |
| MQG1500*4500 | 28.8 | 10 | ≤ 25 | 0.074-0.4 | 4-8 | JR125-8 | 95 | 22.3 |
| MQG1500*5700 | 28.8 | 12 | ≤ 25 | 0.074-0.4 | 5-10 | JR126-8 | 110 | 26.7 |
| MQG1500*6400 | 28.8 | 13 | ≤ 25 | 0.074-0.4 | 8-12 | JR127-8 | 130 | 29.2 |
| MQG1830*3600 | 24.5 | 12 | ≤ 25 | 0.074-0.4 | 5-10 | JR127-8 | 130 | 31.4 |
| MQG1830*5400 | 24.5 | 15 | ≤ 25 | 0.074-0.4 | 5-20 | JR137-8 | 210 | 33.6 |
| MQG1830*6400 | 24.5 | 19 | ≤ 25 | 0.074-0.4 | 6-25 | JR137-8 | 210 | 36.5 |
| MQG1830*7000 | 24.5 | 20 | ≤ 25 | 0.074-0.4 | 8-30 | JR138-8 | 245 | 39.6 |
| MQG2100*3600 | 24.1 | 21 | ≤ 25 | 0.074-0.6 | 8-20 | YR355L1-8 | 210 | 43.2 |
| MQG2100*4500 | 24.57 | 26 | ≤ 25 | 0.074-0.6 | 8-35 | JR138-8 | 280 | 53.6 |
| MQG2200*3600 | 21.8 | 22 | ≤ 25 | 0.074-0.6 | 9-25 | JR138-8 | 245 | 47.8 |
| MQG2200*4500 | 21.4 | 27 | ≤ 25 | 0.074-0.6 | 10-30 | JR138-8 | 280 | 54.7 |
| MQG2200*7500 | 21.8 | 35 | ≤ 25 | 0.074-0.6 | 10-40 | JR158-8 | 380 | 68.4 |
| MQG2200*9000 | 21.4 | 36 | ≤ 25 | 0.074-0.6 | 10-45 | JR1510-8 | 475 | 76.5 |
| MQG2400*3600 | 21.26 | 26 | ≤ 25 | 0.074-0.6 | 10-40 | JR138-8 | 280 | 63.8 |
| MQG2400*7000 | 21.8 | 36 | ≤ 25 | 0.074-0.6 | 10-45 | JR1510-8 | 475 | 82.4 |
| MQG2400*8000 | 21.8 | 42 | ≤ 25 | 0.074-0.6 | 13-50 | JR630-8 | 560 | 85.7 |
| MQG2400*10000 | 21 | 65 | ≤ 25 | 0.074-0.6 | 15-60 | YR560-8 | 710 | 88.6 |
| MQG2600*8000 | 19.6 | 52 | ≤ 25 | 0.074-0.6 | 16-70 | JR1512-8 | 630 | 97.8 |
| MQG2700*3600 | 21.4 | 39 | ≤ 25 | 0.074-0.4 | 13-75 | JR158-8 | 380 | 86.8 |
| MQG2700*4500 | 21.4 | 43 | ≤ 25 | 0.074-0.4 | 13-90 | JR1510-8 | 475 | 91.8 |
| MQG3000*5400 | 19 | 58 | ≤ 25 | 0.074-0.6 | - | TDMK-30 | 630 | 119.7 |
| MQG3000*9000 | 18.3 | 78 | ≤ 25 | 0.074-0.4 | 20-90 | YR1000-8/1180 | 1000 | 152.4 |
| MQG3000*11000 | 18 | 100 | ≤ 25 | 0.074-0.6 | 30-90 | YR6306-8 | 1120 | 166.7 |
| MQG3200*3600 | 18.6 | 56.5 | ≤ 25 | 0.074-0.6 | 20-80 | YR6302-8 | 630 | 127.4 |
| MQG3200*4500 | 18.6 | 65 | ≤ 25 | 0.074-0.6 | 20-90 | YR6302-8 | 800 | 138.6 |
| MQG3200*5400 | 18 | 72 | ≤ 25 | 0.074-0.6 | 30-100 | YR1000-8 | 1000 | 146.7 |
| MQG3200*9000 | 18 | 85 | ≤ 25 | 0.074-0.6 | 30-100 | YR6302-8 | 1250 | 168.6 |
| MQG3600*4500 | 18 | 86 | ≤ 25 | 0.074-0.6 | 30-100 | YR6302-8 | 1250 | 158.7 |
| MQG3600*6000 | 18 | 117 | ≤ 25 | 0.074-0.6 | 45-180 | - | 14000 | 195.6 |
| MQG4000*6000 | 16.9 | 145 | ≤ 25 | 0.074-0.6 | 60-230 | - | 1800 | 221.7 |
| MQG4500*6000 | 15.6 | 180 | ≤ 25 | 0.074-0.6 | 80-300 | - | 2300 | 269.6 |
Send Inquiry to This Supplier
You May Also Like
-
Customized Capacity Ball Mill Machine for Different Ore Processing DemandNegotiableMOQ: 1 Combo
-
Ball Mill for Antimony Ore Grinding Plant Antimony Beneficiation EquipmentNegotiableMOQ: 1 Combo
-
Heavy Load Ball Mill Gearbox Assembly for Mining Ore Grinding EquipmentNegotiableMOQ: 1 Combo
-
Mine Ball Mill for Rock Gold Ore Milling Before CIL CIP Leaching ProcessNegotiableMOQ: 1 Combo
-
Cost‑effective Complete Ball Mill Grinding Circuit for Small Mining ProjectNegotiableMOQ: 1 Combo
-
Continuous Overflow Wet Ball Mill for Copper‑Iron Mixed Ore GrindingNegotiableMOQ: 1 Combo
-
Grate Type Ball Mill for Coarse Grinding of Manganese Tin Tungsten OreNegotiableMOQ: 1 Combo
-
Horizontal Industrial Dry Ball Mill for Non‑ferrous Metal Ore Powder MakingNegotiableMOQ: 1 Combo
-
Ball Mill Machine With Complete Motor Drive System for Mining ApplicationNegotiableMOQ: 1 Combo
-
Secondary Re‑grinding Ball Mill for Concentrate and Tailings ProcessingNegotiableMOQ: 1 Combo
