Contact Platform Support
Help Center220°C High Temp Resistant Customized Dust Filter Cartridge, 1000 CFM, for Pulse Jet Systems
Product Spotlights
Related Products
-
Customized Dust Filter Cartridge 100% Polyester Felt 250°C Working Temp 20-Inch Length 120mm OD 50 Sqft AreaUS$ 0.8 - 1MOQ: 1 Unit -
Customized Dust Filter Cartridge 9-Inch OD 181°F Max Temp 220V Pulse Controller 0.6MPa Compressed AirUS$ 0.8 - 1MOQ: 1 Unit
-
Customized Dust Filter Cartridge Oil-Water Resistant 2.5mm Thickness 500g/m2 1.5m/s Air Velocity ISO 16890 CompliantUS$ 0.8 - 1MOQ: 1 Unit
-
Customized Dust Filter Cartridge 304 Stainless Steel Frame 320g/m2 Media 0.5 Micron Filtration Efficiency Pulse JetUS$ 0.8 - 1MOQ: 1 Unit
-
Customized Dust Filter Cartridge for Pharmaceutical Powder Coating 0.3 Micron 180°C Sterilization Standard Compliant MaterialUS$ 0.8 - 1MOQ: 1 Unit
Anping County Boli Hardware Wiremesh Products Factory — a trusted manufacturer established in 1998 with annual export value exceeding US$5 million — proudly presents our 220°C High Temp Resistant Customized Dust Filter Cartridge, 1000 CFM, for Pulse Jet Systems. With decades of expertise in wire mesh and filtration products, we supply this cartridge to global markets including North America, South America, Europe, and Asia. Engineered for demanding industrial environments, this filter cartridge combines high-temperature resistance, high airflow capacity, and customizable design to meet your specific dust collection needs. It is an ideal solution for pulse jet cleaning systems requiring reliable filtration at elevated temperatures.
Key Features & Advantages
- High Temperature Resistance: Withstands continuous operating temperatures up to 220°C (428°F), suitable for hot gas filtration in industries such as cement, steel, chemical, and power generation.
- Optimized 1000 CFM Airflow: Designed to handle a nominal airflow of 1000 CFM, ensuring efficient dust capture while maintaining low pressure drop.
- Customizable Dimensions: Available in various diameters, lengths, and flange configurations to fit your existing pulse jet dust collector housing.
- Advanced Filter Media: Choose from fiberglass, PTFE membrane, or polyester blends — all treated for high-temperature stability and enhanced dust release.
- Robust Construction: Built with rigid wire mesh support and reinforced end caps, providing long service life even under heavy pulse cleaning cycles.
- Easy Installation & Maintenance: Standard open-end or closed-end design with gasket seal ensures quick replacement and minimal downtime.
- Wide Compatibility: Works seamlessly with major pulse jet cleaning systems (e.g., Donaldson, Camfil, Parker, and custom OEM brands).
Technical Specifications
| Parameter | Value | Notes |
| Maximum Operating Temperature | 220°C (428°F) | Continuous; peak up to 250°C (short term) |
| Nominal Airflow | 1000 CFM | At 1 inch WG pressure drop, depending on media |
| Filtration Efficiency | ≥99.9% for 0.5–1 micron particles | With PTFE membrane; efficiency customizable |
| Filter Media Options | Fiberglass, PTFE, Polyester, Aramid | Select based on chemical and temperature exposure |
| Dimensions (Diameter × Length) | Customizable (e.g., 6"×26", 8"×30", etc.) | Please specify your requirements |
| End Cap Style | Open end, closed end, metal or plastic | Gasket seal included for airtight fit |
Why Choose Our Filter Cartridge?
- Customized for Your Application: We offer tailored solutions — from media selection to dimensional modifications — ensuring the cartridge fits perfectly into your existing system.
- Proven Performance in Harsh Conditions: Our cartridges are used in high-temperature applications like cement kiln baghouses, steel furnace fume extraction, and chemical processing plants.
- Reduced Energy Costs: Lower pressure drop translates to less energy consumption for the fan motor, saving operational costs over time.
- Longer Service Life: The robust construction and high-quality media resist thermal degradation and mechanical wear, reducing replacement frequency.
Frequently Asked Questions (FAQ)
Q1: What is the maximum temperature this filter cartridge can handle?
A: The cartridge is designed for continuous operation at 220°C (428°F). Short-term peaks up to 250°C are acceptable, but we recommend consulting with our engineering team for extreme conditions.
Q2: Can I get the cartridge in a non-standard size?
A: Yes, we specialize in custom dimensions. Simply provide your required diameter, length, and flange type, and we will manufacture accordingly.
Q3: What filtration efficiency can I expect?
A: With standard fiberglass media, efficiency is around 99.5% for 1 micron particles. For higher efficiency (≥99.9% for 0.5 micron), we recommend PTFE membrane media. Please specify your target emission limits.
Q4: Is this cartridge compatible with my existing pulse jet system?
A: Most pulse jet collectors use standard venturi or threaded connections. We can adapt the end cap design (open/closed, gasket, or metal band) to match your brand. Send us a drawing or photo for a quick compatibility check.
Q5: How often should I replace the filter cartridge?
A: Replacement frequency depends on dust load, cleaning cycle, and operating temperature. Typically, our cartridges last 1–3 years in continuous service. Regular monitoring of pressure drop helps determine optimal change-out time.
Q6: What is the lead time for custom orders?
A: For standard sizes, lead time is 15–20 days. Custom orders may require 25–35 days, depending on complexity. We can expedite for urgent projects upon request.
Q7: Do you provide samples for testing?
A: Yes, we offer sample units (cost may apply, refundable with bulk order). Contact our sales team to discuss your testing requirements.
Q8: Can I get a warranty for the cartridge?
A: We provide a 12-month warranty against manufacturing defects under normal operating conditions. Extended warranty options are available upon negotiation.
Anping County Boli Hardware Wiremesh Products Factory has been a leading manufacturer since 1998, with annual export value of US$5–10 million, serving customers across North America, South America, Europe, Asia, and Oceania. Our factory is located in Hengshui, Hebei, China, with convenient shipping ports including Tianjin, Qingdao, and Shanghai. We combine over 25 years of wire mesh and filtration experience with strict quality control to deliver reliable, high-performance filter cartridges. Contact us today for a quote or to discuss your custom requirements — we are ready to help you achieve cleaner air and lower operating costs.
Send Inquiry to This Supplier
You May Also Like
-
Customized Dust Filter Cartridge, 350°F Heat Resistance, 99.9% Efficiency, 15-Inch Length, Standard CompliantUS$ 0.8 - 1MOQ: 1 Unit
-
Customized Dust Filter Cartridge, 100% Polyester, 100°C Max Temp, 6-Inch x 24-Inch, Mill Test Report IncludedUS$ 0.8 - 1MOQ: 1 Unit
-
Customized Dust Filter Cartridge, 220V Pulse Jet Cleaning, 1200 CFM, 12-Inch Diameter, 304 Stainless Steel End CapsUS$ 0.8 - 1MOQ: 1 Unit
-
1000 CFM Custom Dust Filter Cartridge, 6-Inch Diameter, Polyester Pleated Media for Industrial Dust CollectorsUS$ 0.8 - 1MOQ: 1 Unit
-
Customized Dust Filter Cartridge With OEM Service, 1-Year Warranty, Mill Test Report, 100% Leak TestedUS$ 0.8 - 1MOQ: 1 Unit
-
Customized Dust Filter Cartridge for Welding Fume Extraction, 0.5 Micron, 160°C, 1-Year WarrantyUS$ 0.8 - 1MOQ: 1 Unit
-
Customized 304 Stainless Steel Dust Filter Cartridge With 0.5-Micron Filtration for 220°C OperationUS$ 0.8 - 1MOQ: 1 Unit
-
Customized Dust Filter Cartridge, 0.3-5 Micron Rating, 32-Pleat Design, 10-Inch Diameter, 1-Year WarrantyUS$ 0.8 - 1MOQ: 1 Unit
-
Customized Dust Filter Cartridge, 6-Inch x 12-Inch, 350°F, 0.5 Micron, 1-Year Warranty, Standard CompliantUS$ 0.8 - 1MOQ: 1 Unit
-
Customized Dust Filter Cartridge 133mm Dia 1000mm Length Aluminum Core High Temperature ResistantUS$ 0.8 - 1MOQ: 1 Unit
