Contact Platform Support
Help Center2000W Industrial Reciprocating Saw 120, 1500 SPM, 50/60Hz Heavy-Duty
Related Products
-
2" 3" 4" Gasoline Water Pump 1.5/6.5/7.5HP, Centrifugal Farm IrrigationUS$ 20 - 80MOQ: 1 Combo -
Submersible Water Pump 220V 370W, Stainless Steel Impeller, IPX8 DrainageUS$ 20 - 80MOQ: 1 Combo
-
Heavy-Duty Submersible Pump 220V 370W, Cast Iron Body, 12m Max HeadUS$ 20 - 80MOQ: 1 Combo
-
Plunger Pump SD-22A-1 1.5-2HP, 8x113mm Cylinder, 15-25L/MinUS$ 20 - 80MOQ: 1 Combo
-
Gasoline Engine 168F-1 163cc, 3.8kW/3600rpm, Horizontal ShaftUS$ 20 - 80MOQ: 1 Combo
Product Overview
The 120 industrial reciprocating saw is a heavy-duty cutting tool designed for the most demanding professional applications: fire and rescue extrication, heavy demolition, industrial plant maintenance, and emergency services work. Driven by a 2000W industrial-grade motor, the 120 produces 1500 strokes per minute with a 45mm long stroke — delivering substantially more cutting energy per stroke than lighter-duty reciprocating saws. This makes the 120 capable of cutting through materials that would stall or jam lesser saws: thick structural steel, cast iron soil pipe, thick timber framing, and even thin concrete and masonry when fitted with appropriate diamond or carbide blades.
Motor & Cutting Performance
The 2000W industrial motor is built for continuous heavy-duty operation in commercial and emergency-service environments. Unlike lighter-duty saws designed for intermittent homeowner use, the 120's motor is designed to run at full load for extended periods without overheating, thanks to oversized windings, high-quality bearings, and an efficient cooling fan. The 50/60Hz dual-frequency motor operates correctly on global power systems without modification. The 1500 strokes per minute is lower than the 935/6035's 3900 SPM, but the 45mm stroke length is significantly longer, meaning each stroke removes substantially more material — ideal for heavy demolition rather than fine finish work.
Industrial Applications
The 120 is specifically designed for applications where standard reciprocating saws would fail or stall. In fire and rescue work, the saw is used to cut through vehicle frames, building components, and other obstructions to free trapped persons. In heavy demolition, it cuts through thick timber, steel beams, cast iron plumbing, and reinforced structures. In industrial plant maintenance, it handles pipe cutting, tank opening, and equipment disassembly. The saw accepts all standard reciprocating saw blades, plus specialized heavy-duty blades for concrete, masonry, and rescue cutting.
Build & Ergonomics
The D-handle main grip is rubber-overmolded for secure grip and vibration damping. The tool is well balanced for both one-handed and two-handed operation, with the motor weight centered to reduce wrist strain. The quick-release blade clamp allows blade changes in seconds, critical for emergency services where every second counts. A heavy-duty power cord is rated for industrial use, and the cord strain relief prevents internal wire damage from rough handling. A trigger lock prevents accidental starts during transport.
Safety & Maintenance
The 120 incorporates thermal overload protection that interrupts power if the motor overheats during sustained heavy use, protecting the windings from damage. The motor brushes are accessible for inspection and replacement. The gearbox is sealed and lubricated for life. The saw is designed to be field-serviceable with common tools, allowing emergency services and industrial users to perform routine maintenance on-site.
Typical Applications
Fire and rescue extrication, heavy industrial demolition, structural steel and thick pipe cutting, cast iron soil pipe cutting, automotive frame and exhaust cutting, emergency disaster response, plant maintenance and equipment disassembly, concrete and masonry cutting with appropriate blades.
Packing & Logistics
Supplied in a protective iron case for heavy-duty transport. Qty/CTN: 1/1.
Parameters
| Parameter | Value |
|---|---|
| Item No. | L182712 |
| Model | 120 |
| Rated Voltage | 220V~ |
| Rated Power | 2000W |
| Stroke Length | 45mm |
| No-Load Stroke Rate | 1500 /min |
| Rated Frequency | 50/60Hz |
| Motor Type | Industrial Universal |
| Blade Mount | Standard Reciprocating Shank |
| Packing | Iron Case |
| Qty/CTN | 1/1 |
Send Inquiry to This Supplier
You May Also Like
-
Belt-Driven Gasoline Sprayer 168F-22A, 25-49cc Pump, 15-25L/MinUS$ 20 - 80MOQ: 1 Combo
-
Portable Gasoline Generator 1500W 110-230V, 154F Engine, Aluminum CoilUS$ 20 - 80MOQ: 1 Combo
-
Inverter ARC Welder ZX7-228 220V, 20-100A, IGBT Portable Stick WelderUS$ 20 - 80MOQ: 1 Combo
-
Oil-Free Silent Air Compressor 1200W-100L, 225L/min, 4-Bar, 2800rpmUS$ 20 - 80MOQ: 1 Combo
-
Industrial Belt-Drive Air Compressor 1500W 180L, 2.0m³/min 8barUS$ 20 - 80MOQ: 1 Combo
-
MIG Gas-Shielded Welder MIG-140G, 20-120A Output, 220V/50HzUS$ 20 - 80MOQ: 1 Combo
-
Portable Cut-Off Machine 9316 350mm, 3800rpm, 110-220VUS$ 20 - 80MOQ: 1 Combo
-
Portable Cut-Off Machine 9316 350mm, 3800rpm, 110-220VUS$ 20 - 80MOQ: 1 Combo
-
Mist Duster Sprayer 3WF-3A-20L, 2.13kW/7500rpm, Backpack Mist BlowerUS$ 20 - 80MOQ: 1 Combo
-
Mist Duster Sprayer 3WF-3B-26L, 2.13kW/7500rpm, EVA Tank DusterUS$ 20 - 80MOQ: 1 Combo
