Contact Platform Support
Help CenterAluminium Brass Bearing
Related Products
Aluminum Brass is an alloy built by artisans. It is best known for casting parts from smelters.
The Aluminium Brass Alloy can also be used in the construction of parts added to the same mod. Aluminum VS Brass made by smelting Aluminum to Copper in a 3:1 ratio.
The main alloy composition of aluminum brass is Cu-Zn-Al. In practical application, in order to improve the strength, corrosion resistance, wear-resistance, and other properties of aluminum brass, the elements such As As, Mn, Fn, and Ni are often added into the alloy to greatly improve the comprehensive properties of the material.
Because the equivalent coefficient of Al and Zn is 6, the tendency of forming β phase is larger and the strengthening effect is good. When the content of aluminum increases, γ phase will appear.
Although the hardness of the aluminum brass alloy is increased, the plasticity is greatly reduced. In aluminum brass, the tendency of ionization on the surface of aluminum is greater than that of zinc, and the formation of precise and hard alumina film is preferred to prevent further oxidation of the alloy and improve the corrosion resistance to gas, solution, especially high-speed seawater.
C86300 & C86400 are suitable for the parts with high strength and low wear resistance. Like copper plate, turbine, screw, bushing, nut.
Send Inquiry to This Supplier
You May Also Like
-
WB702 Bronze BushingNegotiableMOQ: 1 Piece -
WB700 Bronze BushingNegotiableMOQ: 1 Piece
-
DX Maginal BushingNegotiableMOQ: 1 Piece
-
DU Oilless BushingNegotiableMOQ: 1 Piece
-
Flanged Bimetal BushNegotiableMOQ: 1 Piece
-
Bronze PadNegotiableMOQ: 1 Piece
-
Bimetal BearingNegotiableMOQ: 1 Piece
-
Brass and Bronze Bushing With Graphite FilledNegotiableMOQ: 1 Piece
-
Bronze & Brass Wear Plate/padNegotiableMOQ: 1 Piece
-
Thrust WasherNegotiableMOQ: 1 Piece
