Contact Platform Support
Help CenterUV Resistant PC 2407 Covestro
Related Products
-
Food Grade PC 2856(Covestro）NegotiableMOQ: 25 Kilograms -
Light Diffusion PCNegotiableMOQ: 25 Kilograms
-
Ultra-tough, Cold-resistant PC EXL1414T SabicNegotiableMOQ: 25 Kilograms
-
Glass Fiber-reinforced PC 500RNegotiableMOQ: 25 Kilograms
-
Highly Transparent Halogen-free Flame-retardant PC 945A SABICNegotiableMOQ: 25 Kilograms
PC is an almost colorless glassy amorphous polymer with excellent optical properties.
PC high molecular weight resin has high toughness, with a cantilever beam notch impact strength of 600-900J/m. The unfilled grade has a thermal deformation temperature of approximately 130 ° C, and glass fiber reinforcement can increase this value by 10 ° C. The bending modulus of PC can reach over 2400MPa, and the resin can be processed into large rigid products. Below 100 ° C, the creep rate under load is very low. PC has good hydrolysis resistance, but cannot be used for products that are repeatedly subjected to high-pressure steam.
Performance characteristics of PC:
1. Good transparency, with a light transmittance of 90%, making it a transparent material with better heat resistance than PMMA (140 ° C);
2. Good low temperature resistance, can be used for a long time at -100 ° C-140 ° C;
3. Outstanding impact resistance, creep resistance, and dimensional stability; Outstanding impact resistance, creep resistance, and dimensional stability;
4. Good electrical insulation at a wide temperature range (-100-140 ° C) and a wide frequency range (60-10106Hz); Good electrical insulation at a wide temperature range (100~℃) and a wide frequency range (Hz); Good electrical insulation;
5. Good processability (injection, extrusion, blowing, salivation, compression, etc.).
PC Characteristics and Applications:
High tensile and bending strength, good impact toughness and creep resistance, high heat resistance, cold resistance and dimensional stability, high transparency, low water absorption, good insulation and processing formability, poor chemical stability, gaskets, sleeves, capacitors and other insulating parts; Instrument casing and protective cover; Manufacturing signal lights, windshields, cockpit covers, helmets, etc. in the aviation and aerospace industry.
Send Inquiry to This Supplier
You May Also Like
-
(Zytel) Thermally Stable Fiber-reinforced PA66 70G30HSLNegotiableMOQ: 25 Kilograms
-
Pure Resin Heat Stable PA66 103HSL DuPontNegotiableMOQ: 25 Kilograms
-
DuPont PA66 ST801 Pure Resin With Ultra-high ToughnessNegotiableMOQ: 25 Kilograms
-
DuPont FR50 Glass Fiber Reinforced Halogen-free Flame Retardant PA66NegotiableMOQ: 25 Kilograms
-
UV Resistant Toughened PA66 105F(Zytel )NegotiableMOQ: 25 Kilograms
-
PA66 80G14 DuPontNegotiableMOQ: 25 Kilograms
-
DuPont PA66 70G25HSLR Heat Stable and Resistant to HydrolysisNegotiableMOQ: 25 Kilograms
-
DuPont PA66 70G33L Fiberglass Reinforcement 33%NegotiableMOQ: 25 Kilograms
-
PA66 MT409AHS（DuPont） Toughening and Thermal StabilityNegotiableMOQ: 25 Kilograms
-
Heat Stable Halogen-free Flame Retardant PA66 FR7025V0FNegotiableMOQ: 25 Kilograms
