Contact Platform Support
Help CenterGE Fanuc IC697ADC701 – Letter and Number Display Coprocessor Module for Series 90-70 Racks
Related Products
-
GE IC693CPU374-JY Core Processor Module – Ethernet-enabled CPU for Series 90-30 Control SystemsUS$ 1216.00MOQ: 1 Blade -
GE Fanuc IC693ALG220F – 4‑Channel Analog Voltage Input for Series 90‑30 PLC ControlUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697ALG320 – Series 90-70 8-Channel Analog Input Module for Voltage/Current SignalsUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697CPM914 GMR Redundant CPU Module – High‑availability Control for Series 90‑70 PlatformsUS$ 1216.00MOQ: 1 Blade
-
GE DS3820LT4A.1C1A – Signal Conditioning and Drive Interface Module for GE Mark IV/industrial Drive RacksUS$ 1216.00MOQ: 1 Blade
Warranty: 365 days
Delivery: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment, full payment before delivery
Express options: FedEx, UPS, DHL
Each unit is function-tested before dispatch and packaged for industrial transport.
Alphanumeric display control – Purpose-built to drive letter/number displays for straightforward operator messaging and status codes.
Backplane integration with Series 90-70 – Ties directly into the IC697 rack, so data exchange with the CPU is quick and deterministic.
Offloads CPU tasks – Formatting, updates, and simple annunciation are handled on the coprocessor, reducing ladder complexity.
Front-panel status – In most cases you get clear status/diagnostic indication for faster troubleshooting on the line.
Simple messaging workflow – Typically supports ASCII-style character handling for rapid updates to connected displays.
Single-slot footprint – Fits standard IC697 racks with no external power supply required; draws from the backplane.
| Brand / Model | GE Fanuc IC697ADC701 (Series 90-70) |
| Product Type | Letter and Number Display Coprocessor Module |
| HS Code | 8538.90 (Parts suitable for apparatus of 85.35/85.36/85.37) |
| System Compatibility | IC697 racks and backplanes (Series 90-70 family) |
| Power Requirements | Backplane +5 VDC; typical consumption up to ~1.5 A (application dependent) |
| Dimensions & Weight | Single-slot IC697 module; typical weight ~0.9 kg |
| Operating Temperature | 0 to 60°C (standard PLC cabinet environments) |
| Signal I/O Types | Character/segment display drive via front-panel display interface (implementation varies by display kit) |
| Communication Interfaces | IC697 backplane interface; dedicated front-display connection |
| Installation Method | Plugs into IC697 rack slot; screw-latch retention; no external power supply |
The IC697ADC701 suits legacy and long-life facilities where simple, reliable operator messaging is enough. Typical examples include:
Packaging lines that need line speed, batch count, or changeover cues shown near the machine
Material handling and conveyors where concise fault codes speed maintenance response
Utilities and process skids with status/alarm text required at a glance
Machine tools or test stands upgrading from lamp panels to simple text displays
A maintenance manager told us their operators “didn’t need a touchscreen—just a readable fault name.” This coprocessor tends to be the low-risk route for those cases.
Reliability – Mature Series 90-70 hardware with predictable behavior and long service life.
Compatibility – Designed for IC697 racks; typically drops into existing systems with minimal code changes.
Lower engineering overhead – Offloads display logic, which often cuts commissioning hours versus DIY ladder solutions.
Cost-effective alternative – For many plants, a character display is all that’s needed, avoiding full HMI costs.
Service & parts continuity – Supports long-running 90-70 fleets without major platform changes.
Cabinet & rack – Install in a GE IC697 rack with adequate ventilation; follow Series 90-70 grounding and shielding practices.
Environment – 0–60°C, 5–95% RH non-condensing; avoid corrosive atmospheres and vibration beyond PLC specs.
Wiring – Use the recommended display cable/connector; route low-voltage display lines away from high-noise power wiring.
Safety – Power down the rack before insertion/removal; observe ESD precautions when handling the module.
Routine care – Periodically check connector seating, clean dust from the card face, and verify display text mapping after firmware or logic changes.
Typically compliant with CE and UL for the Series 90-70 family; CSA markings may be present depending on unit
Manufactured to industrial standards; each unit is inspected and function-tested prior to shipment
Warranty: 365 days
IC697CHSxxx racks (slot count as needed)
IC697PWRxxx power supplies sized to total backplane load
IC697CPMxxx CPUs for Series 90-70 control
Compatible alphanumeric display units and cables matched to the IC697ADC701 front interface
If you’re refreshing a 90-70 cabinet and want simple, dependable operator messaging, the IC697ADC701 tends to be the practical choice—no surprises, easy to maintain, and it keeps your CPU focused on control.
Send Inquiry to This Supplier
You May Also Like
-
GE IC687BEM742-EB I/O Expansion Module – Scalable Rack Expansion for GE Industrial Control SystemsUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697CPU731 – Series 90-70 CPU Module for High-performance PLC ControlUS$ 1216.00MOQ: 1 Blade
-
GE IC695PBM300 – PROFIBUS DP Master Module for PACSystems RX3iUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697ACC721 Rack Fan Assembly – Cooling Solution for Series 90-70 PLC RacksUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697BEM733 Bus Expansion Module – Reliable Rack-to-rack Expansion for Series 90-70 SystemsUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697ALG440 – 90-70 Analog Input Expansion Module for Reliable Voltage/current Signal AcquisitionUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697BEM711 Bus Expansion Module – Extend Your Series 90-70 Backplane to More RacksUS$ 1216.00MOQ: 1 Blade
-
GE 469-P5-HI-A20-E: Stop Guessing When Motors FailUS$ 1216.00MOQ: 1 Blade
-
GE 489-P1-LO-A1-T: Your Go-To Motor Guardian for Critical Low-Voltage SystemsUS$ 1216.00MOQ: 1 Blade
-
GE 489-P1-LO-A1-E Motor Management Relay: Precision Protection for Critical Industrial MotorsUS$ 1216.00MOQ: 1 Blade
