FOXBORO RH924WA Fiber Optic Network Adapter – Reliable Fiber Link for I/A Series and Plant Ethernet Segments

• Industrial fiber link for Foxboro networks – Provides a robust optical connection for I/A Series DCS segments where copper isn’t practical.

• EMI immunity and long-distance runs – Fiber typically shrugs off electrical noise and enables longer spans across large facilities.

• Designed for cabinet deployment – Compact module form that fits well in control panels with clean cable routing.

• Ethernet compatibility – Works within standard IEEE 802.3 Ethernet environments used alongside Foxboro controllers and switches.

• Safer plant networking – Optical isolation reduces ground loop issues and transient risks on critical control networks.

• Supports redundant architectures – Suitable for dual-path designs to enhance network availability, which many plants prefer for CCR links.

Note: Interface details (connector type and specific link speed) can vary by sub-variant and network design. We typically verify against the site’s Foxboro DCS topology before shipment.

• Process plants using FOXBORO I/A Series or EcoStruxure Foxboro DCS segments that require fiber backbones between cabinets or buildings.

• Areas with heavy EMI, VFDs, or high-current equipment where copper Ethernet is unreliable.

• Long-haul control room to remote I/O marshalling panels, utility corridors, and substation links.

• Oil & gas, refining, chemicals, pharmaceuticals, power generation, water/wastewater—where deterministic and resilient networking is valued.

• Reliability under noise – Fiber optic links typically perform better around high-energy equipment and long cable trays.

• Compatibility with Foxboro architectures – Designed to sit comfortably in Foxboro network topologies without awkward workarounds.

• Lifecycle confidence – Industrial-grade design with straightforward replacement and spares strategy.

• Cost control – In many cases, shifting critical legs to fiber reduces downtime from transient faults on copper.

• Support – We can help verify fiber type (single-mode vs. multimode), connector standard, and path redundancy before you place the order.

• Cabinet environment – Install in a ventilated control cabinet; maintain ambient 0–60 °C and avoid condensation.

• Power and grounding – Supply stable 24 VDC; maintain proper cabinet grounding to minimize common-mode noise.

• Fiber handling – Respect bend radius, use quality patch cords, and clean connectors (lint-free wipes and appropriate solvent).

• Redundancy – Where the DCS design allows, run dual fiber paths in separate routes to improve availability.

• Wiring checks – Verify Tx/Rx polarity, connector type (SC/ST), and fiber type (MM/SM) to match plant standards.

• Routine maintenance – Periodic port inspection, connector cleaning, and logging link stats; apply firmware updates if the installed variant supports them.

• Manufacturer-built to industrial standards; CE compliant in typical deployments

• UL/CSA conformity expected for control-cabinet installation

• RoHS alignment for restricted substances

• Backed by a 365-day warranty from shipment

• Industrial fiber patch cords (SC–SC or ST–ST; 62.5/125 µm multimode or OS2 single‑mode depending on site spec)

• DIN-rail fiber management trays and labeled bulkhead adapters for clean routing

• Industrial Ethernet switches with fiber uplinks for ring or redundant star topologies