Contact Platform Support
Help CenterRexroth Indramat DKS01.1-W030B-DL05-00 AC Servo Drive – Reliable 30 A Axis Control for Fast, Precise Motion
Related Products
-
Rexroth PPC-R22.1N-T-Q2-G2-NN-FW – Multi‑Axis Motion and Machine Control for Demanding LinesUS$ 2216.00MOQ: 1 Blade -
REXROTH FCS01.1E-W0011-A-04-NNBV High‑Efficiency AC Frequency Converter – Energy‑Saving Speed Control for 3‑Phase MotorsUS$ 3216.00MOQ: 1 Blade
-
REXRTOH SYHNC100-NIB-22a/W-24-P-D-E24: The Axis Controller That Keeps Your Production Line Breathing at 3 AMUS$ 236.00MOQ: 1 Blade
-
Bosch Rexroth HMV01.1R-W0018-A-07-FNN1: Precision Hydraulic Valve Control ModuleUS$ 236.00MOQ: 1 Blade
-
Rexroth VTS0234-47/AP025: High-Speed Servo Drive for Precision Motion ControlUS$ 236.00MOQ: 1 Blade
Warranty: 365 days
Lead time: 1 week when in stock; no more than one month at the latest
Payment: 50% advance payment; full payment prior to delivery
Shipping: FedEx, UPS, DHL
30 A current class (W030) – Suits medium-to-high torque applications that need quick acceleration and stable speed control.
Single-axis, cabinet-mounted design – A space-efficient module that integrates neatly into standard industrial panels.
Analog command control (DL option family) – In many cases this variant supports ±10 V command with digital enable/ready signals, keeping integration straightforward with legacy or simple motion controllers.
Motor feedback compatibility – Typically supports Rexroth/Indramat digital servo feedback used on MDD/MKD series motors for precise commutation and diagnostics.
Fast fault indication – Clear status LEDs and diagnostic codes help maintenance teams shorten downtime.
Robust build for continuous duty – Designed for 24/7 industrial environments; you might notice it runs cool and steady when the cabinet airflow is set up correctly.
| Brand / Model | Rexroth Indramat DKS01.1-W030B-DL05-00 |
| HS Code | 850440 (Static converters / AC drive units) |
| Power Requirements | Three-phase AC mains; 30 A current class (exact voltage and fuse sizing per nameplate/version) |
| Operating Temperature | 0 to 45°C (typical for DKS series in ventilated cabinets) |
| Signal Input/Output Types | ±10 V analog command (DL option family), digital enable/ready/fault; motor encoder feedback via Indramat digital servo feedback |
| Communication Interfaces | Analog command interface; front diagnostics/LEDs (fieldbus not typical on this variant) |
| Installation Method | Panel/cabinet mounting, vertical orientation; forced-air ventilation recommended |
| Protection Class | IP20 (cabinet use) |
This drive shows up a lot in packaging machinery (form-fill-seal, cartoners), printing/press lines, pick-and-place gantries, and light-to-medium machine tools. One thing I appreciate is how predictable the torque response feels when used with MDD/MKD motors—motion profiles for feeders, unwind/rewind, or synchronized conveyors are usually quick to dial in.
Packaging and converting lines needing fast indexing and stable web tension
Printing and labeling systems with precise velocity loops
Material handling axes and small gantries with repetitive duty cycles
General-purpose automation retrofits where analog command simplifies integration
Customer feedback (typical): “Dropped in as a replacement and we were running before lunch. Diagnostics were straightforward, and the motor tuning didn’t take long.”
Drop-in replacement potential – Minimizes line downtime when swapping older units with matching motor feedback.
Compatibility with established controls – ±10 V command suits many PLC/motion setups; no need to redesign the control architecture.
Predictable lifecycle costs – Spare parts, repair, and parameter support are widely available for this series.
Technical support – Parameter guidance and start-up assistance typically shorten commissioning.
Cabinet requirements – Mount vertically in a sealed control cabinet; allow adequate top/bottom clearance for airflow. Keep ambient below 45°C and avoid dust/oil mist where possible.
Power and grounding – Use the specified three-phase mains with correct fusing and a low-impedance PE ground. Shield motor and encoder cables; bond shields on the drive side.
Wiring practices – Separate power and signal runs; route encoder/analog lines away from contactors and VFD output cables.
Safety – Lockout/tagout before service; wait for DC link discharge. Verify motor brake control, emergency stop, and enable circuits.
Routine maintenance – Quarterly dust cleaning, connector re-seating checks, fan/filter inspection, and parameter backup. Firmware/parameter updates should follow your site’s change control.
Manufacturer quality standards typically include CE compliance; many units in this family are UL Recognized and RoHS conform (depends on production year and region).
Warranty provided: 365 days from shipment.
Send Inquiry to This Supplier
You May Also Like
-
Bosch Rexroth MSK061C-0300-NN-S1-UG0-NNNN: Your Go-To Compact Servo Motor for Tight SpacesUS$ 236.00MOQ: 1 Blade
-
Rexroth DKC11.1-040-7-FW: Your Workhorse for Demanding Motion Control TasksUS$ 236.00MOQ: 1 Blade
-
REXRTOH SYHNC100-NIB-2X/W-24-P-D-E23-A012: Precision Motion Control for Demanding Industrial LinesUS$ 236.00MOQ: 1 Blade
-
Rexroth PPC-R22.1N-N-Q1-NN-NN-FW: Precision Motion Control for Demanding Industrial ApplicationsUS$ 236.00MOQ: 1 Blade
-
Bosch Rexroth 4WRSE10V80-32: Precision Hydraulic Flow Control for Demanding Industrial SystemsUS$ 236.00MOQ: 1 Blade
-
Rexroth R901325866 Proportional Solenoid Valve: Built for When Your Machinery Can't Afford DowntimeUS$ 2326.00MOQ: 1 Blade
-
Rexroth MSK030C-0900: Precision Motion Where It CountsUS$ 236.00MOQ: 1 Blade
-
Rexroth VT-MVTW-1-16/D: Your Compact Digital I/O Workhorse for Tight Control PanelsUS$ 236.00MOQ: 1 Blade
-
Rexroth CDB01.1C-SE-ENS: Your Motion Control Workhorse for Complex AutomationUS$ 236.00MOQ: 1 Blade
-
Rexroth MKD071B-061-KP0-KN: Heavy-Duty Synchronous Motor That Actually Holds Position When Power DropsUS$ 236.00MOQ: 1 Blade
