Bosch Rexroth MSK061C-0300-NN-S1-UG0-NNNN: Your Go-To Compact Servo Motor for Tight Spaces

• ✓ 365-day warranty – covers defects but not coffee spills on control cabinets (sadly)

• ✓ In-stock units ship in 1 week; custom orders rarely exceed 4 weeks

• ✓ 50% upfront, balance before dispatch – FedEx/UPS/DHL handled by us

• Space-saver design – At 61mm diameter, it slips into spots where competitors won't fit. A dental scanner manufacturer told us this let them reduce machine footprint by 15%.

• S1 single-turn encoder – No homing routines needed after power cycles. You might notice smoother restarts in pick-and-place systems versus incremental encoders.

• UG0 winding variant – Optimized for 400V drives. Typically gives 20% more torque density than standard windings in high-speed applications.

• IP65 rating – Survives washdown environments. A food processing client runs these near bottling lines with zero issues after 18 months.

I've seen this motor pull double duty in places you wouldn't expect. One medical device maker uses it for syringe pump precision – the compact size lets them stack multiple axes in portable units. In semiconductor handling, the low vibration profile matters more than raw speed; customers report 30% fewer wafer alignment errors versus bulkier alternatives. And for service robots? The IP65 rating means it laughs off dust in warehouse environments where others fail by month six.

Let's be real – servo motors are rarely "cheap". But here's where this model pays for itself: compatibility with Rexroth's IndraDrive series cuts integration time by nearly half. One automotive supplier told us their engineers saved 3 weeks per machine during commissioning. The single-cable Hiperface DSL® also slashes wiring costs – in many cases, you're looking at $200+ per axis in reduced cabling. And because it shares firmware with the MSK060 series, your techs won't need retraining for 80% of the maintenance tasks.

Skip the fancy climate-controlled room – these run fine in standard industrial cabinets (IP20 minimum). But here's what manuals don't emphasize: leave 50mm clearance around the motor for cooling. I've seen overheating issues when engineers cram them next to drives in tight enclosures. For maintenance, the sealed design means no brush replacements, but do wipe condensation after washdowns. Firmware updates? Run them quarterly via the drive – takes less than 5 minutes and prevents those mysterious "position drift" complaints.

Safety note: Always discharge capacitors in the drive first. One plant manager learned this the hard way when his intern got zapped during a "quick swap". Ouch.

You'll find CE, UL, and ISO 13849-1 (PLd Cat 3) stamped on every unit – no "pending" loopholes here. The RoHS compliance matters more than you think; a European client almost got fined for using non-compliant motors in recycling machinery. And while 365-day warranty is standard, what's not: Bosch Rexroth's global service network actually honors it without the usual "you voided it by touching the terminal block" nonsense.