Contact Platform Support
Help CenterALSTOM MFAC14K1AA0001A – Plug‑In Control Module for ALSTOM Rack Systems
Related Products
-
ALSTOM MCTI40N1AB0751G – Control Interface Module for Traction and Converter SystemsUS$ 3660.00MOQ: 1 Combo -
ALSTOM MLU VER.A01 Main Logic Unit – Reliable Central Control for Legacy ALSTOM CabinetsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAA14B1AA0785C Control Board – OEM Plug‑in Module for Legacy ALSTOM Drive and Automation CabinetsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAJ23B1AB0757B – Heavy‑Duty Auxiliary/Tripping Relay for Protection PanelsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAJ21L1GB0771B – Heavy‑Duty Auxiliary/Tripping Relay for Protection PanelsUS$ 3660.00MOQ: 1 Combo
Warranty: 365 days
Delivery time: 1 week for in‑stock; no more than one month at the latest
Payment method: 50% advance payment, full payment for delivery
Express delivery methods: FedEx, UPS, DHL
Backplane-powered design – No external power wiring; the module draws power directly from the host rack for cleaner cabinet layouts.
Deterministic rack bus interface – Communicates via the ALSTOM system backplane for predictable timing, which typically helps with sequence and protection logic.
Service-friendly construction – Front extraction handles and guide rails make swaps quick; one maintenance lead told us the replacement took under 15 minutes end‑to‑end.
Status indication – Onboard LEDs (where applicable on this family) to aid diagnostics during commissioning and fault isolation.
Conformal‑coated PCB – In many cases these boards are coated to improve resistance against humidity and airborne contaminants common in power plant environments.
Form, fit, function replacement – Intended as a like‑for‑like unit to minimize logic changes and re‑qualification work.
| Brand / Model | ALSTOM MFAC14K1AA0001A |
| HS Code (export reference) | 853890 — Parts for electrical control apparatus |
| Power Requirements | Backplane powered from the host ALSTOM rack; no external power input |
| Communication Interfaces | Proprietary rack backplane bus via edge connector |
| Signal I/O | Signals are routed through the system backplane to terminal blocks or companion modules (no direct field terminals on the front) |
| Installation Method | Plug‑in card for ALSTOM rack; guided insertion with front locking screws |
| Operating Temperature | Typically 0 to +55°C for this family (application and enclosure dependent) |
| Form Factor | Compact rack plug‑in card; lightweight for easy field replacement |
This model is commonly used in legacy ALSTOM control cabinets found in:
Power generation units (thermal, combined cycle, and hydro) for turbine and balance‑of‑plant control
Substation and grid‑adjacent control panels where ALSTOM racks are installed
Process plants that standardized on ALSTOM control platforms and require like‑for‑like spares
One thing I appreciate is how this kind of module keeps mature systems running without forcing a full migration project—especially when you only need to address a single I/O channel fault or intermittent board error.
Reliability – Tested modules reduce unplanned outages; ideal as a cold spare in critical cabinets.
Compatibility – Form/fit/function match helps avoid software changes and re‑qualification.
Cost & downtime savings – Fast shipment typically beats OEM lead times, cutting outage windows.
Support – From my experience, having access to revision‑matched units simplifies maintenance records and keeps lifecycle documentation clean.
Cabinet environment – Install in a clean, dry, ventilated control cabinet. Keep ambient typically between 0–55°C and humidity non‑condensing.
Handling – Observe ESD precautions. Power down the rack or follow the platform’s approved hot‑swap procedure if supported.
Seating & fastening – Slide along the guide rails, ensure the edge connector is fully mated, and secure with the front screws.
Wiring – Field wiring remains on terminal panels or companion I/O boards; verify channel mappings before restart.
Routine checks – Quarterly visual inspection for dust, corrosion, or connector looseness. Clean with dry air; avoid solvents.
Firmware/config – Match module revision and configuration files to your rack’s baseline. Keep a backup of the working configuration.
Manufactured under ISO 9001 quality systems (typical for ALSTOM legacy production)
CE conformity where applicable to the complete assembly/cabinet
RoHS compliance may vary for legacy spare parts; certain exemptions often apply in industrial control
365‑day warranty coverage from shipment date
Plants pairing the MFAC14K1AA0001A often keep on hand: rack power supply modules, backplane connectors, terminal interface boards, and a small stock of front panel screws and extraction handles. It seems to be a simple way to prevent small hardware issues from causing long outages.
Send Inquiry to This Supplier
You May Also Like
-
ALSTOM MVAJ27L1FB0784D – Heavy‑Duty Trip/Auxiliary Relay for Protection and Control PanelsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAJ13D1GB0780A – Heavy‑duty Auxiliary Tripping Relay for Protection and Lockout SchemesUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAW11B1AB0513A – Heavy‑duty Auxiliary/Tripping Relay for Protection & Switchgear PanelsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAJ53H1LB0856A – Heavy‑Duty Auxiliary Tripping Relay for Substation and Industrial ProtectionUS$ 4660.00MOQ: 1 Combo
-
ALSTOM MVAW11B1AB9007A – Auxiliary Protection Relay for Trip/Interlock Duties in Power SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAX31C1DF0754A – Rack‑mount Control Module for Alstom Legacy Automation and Protection SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAX12B1DA0753A – Plug‑in I/O Module for MVAX Automation and Protection SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVTT14B1BA0773C – Plug‑In Turbine Control Module for Legacy ALSTOM RacksUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVTU11K1CD0751G – Voltage Transducer/Measurement Module for Protection and Control SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM N70032702L – Plug-in Control Board for Rail and Industrial Control CabinetsUS$ 3660.00MOQ: 1 Combo
